Network Router User Manual
Monitoring the SRX210 Services Gateway Components Using LEDs
Table 43: Component LEDs on the Services Gateway
Possible Causes and
Corrective ActionsMeaningStateLED
Normal condition. No
action is required.
Indicates that the device is
functioning normally.
GreenStatus LED
Normal condition. No
action is required.
■
The device is starting
up.
■
The Reset Config button
is pressed.
Amber
Contact the Juniper
Networks Technical
Assistance Center (JTAC).
See “Juniper Networks
Technical Assistance
Center” on page 128.
An error is detected in the
device.
Red
A major alarm indicates a
critical situation on the
gateway that requires
immediate action.
See “Monitoring the
SRX210 Services Gateway
Using Chassis Alarm
Conditions” on page 122.
The device detects a major
alarm.
RedAlarm LED
A minor alarm requires
monitoring or
maintenance. If left
unchecked, it might cause
an interruption in service
or degradation in
performance.
See “Monitoring the
SRX210 Services Gateway
Using Chassis Alarm
Conditions” on page 122.
The device detects a minor
alarm.
Amber
Normal condition. No
action is required.
The device is starting up.
NOTE: When the system is
up and running, if the Alarm
LED is off, it indicates that
no alarms are present on the
device.
Off
120 ■ Monitoring the SRX210 Services Gateway Components Using LEDs
SRX210 Services Gateway Hardware Guide