Manualshelf

Network Router User Manual

ManualsBrandsJuniper Networks ManualsNetwork CardSRX 210
141142143144145146147148149150
Related Topics ■ Changing the Reset Config Button Behavior on the SRX210 Services Gateway on
page 127
■ Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 117
■ Monitoring the SRX210 Services Gateway Components Using LEDs on page 120
■ Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on
page 122
■ Monitoring the SRX210 Services Gateway Power System on page 125
■ Juniper Networks Technical Assistance Center on page 128
Changing the Reset Config Button Behavior on the SRX210 Services Gateway
You can change the default operation of the Reset Config button by limiting how the
button resets the services gateway:
■ To prevent the Reset Config button from setting the device to the factory default
configuration and deleting all other configurations:
admin@host# set chassis config-button no-clear
You can still press and quickly release the button to reset it to the rescue
configuration.
■ To prevent the Reset Config button from setting the device to the rescue
configuration:
admin@host# set chassis config-button no-rescue
You can still press and hold the button for 15 seconds or more to reset the
gateway to the factory defaults.
■ To disable the button and prevent the device from resetting to either
configuration:
admin@host# set chassis config-button no-clear no-rescue
The no-rescue option prevents the Reset Config button from loading the rescue
configuration. The no-clear option prevents the Reset Config button from deleting all
configurations on the services gateway.
To return the function of the Reset Config button to its default behavior, remove the
config-button statement from the device configuration.
Related Topics ■ Using the Reset Config Button on the SRX210 Services Gateway on page 126
■ Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 117
■ Monitoring the SRX210 Services Gateway Components Using LEDs on page 120
■ Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on
page 122
Changing the Reset Config Button Behavior on the SRX210 Services Gateway ■ 127
Chapter 18: Monitoring the SRX210 Services Gateway