Network Router User Manual
About This Guide
This preface includes the following topics:
■ Objectives on page xv
■ Audience on page xv
■ Documentation Conventions on page xv
■ SRX Series Documentation and Release Notes on page xvii
■ Obtaining Documentation on page xviii
■ Documentation Feedback on page xviii
■ Requesting Technical Support on page xviii
Objectives
This guide describes hardware components and installation, basic configuration, and
basic troubleshooting procedures for the Juniper Networks SRX210 Services Gateway.
It explains how to prepare your site for services gateway installation, unpack and
install the hardware, power on the services gateway, perform initial software
configuration, and perform routine maintenance. After completing the installation
and basic configuration procedures covered in this guide, see the JUNOS software
configuration guides for information about further JUNOS software configuration.
Audience
This guide is designed for network administrators who are installing and maintaining
a Juniper Networks SRX210 Services Gateway or preparing a site for device
installation. To use this guide, you need a broad understanding of networks in general
and the Internet in particular, networking principles, and network configuration. Any
detailed discussion of these concepts is beyond the scope of this guide.
Documentation Conventions
Table 1 on page xvi defines the notice icons used in this guide.
Objectives ■ xv