Network Router User Manual

Appendix C
SRX210 Services Gateway Interface
Cable Specifications and Connector
Pinouts
The network interfaces supported on the services gateway accept different types of
network cables.
This appendix includes the following topics:
■ Interface Cable and Wire Specifications for the SRX210 Services
Gateway on page 161
■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet
Port on page 162
■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Console
Port on page 163
■ RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated
Convergence Services FXO and FXS Ports on page 164
Interface Cable and Wire Specifications for the SRX210 Services Gateway
Table 49 on page 161 lists the specifications for the cables that connect to ports.
Table 49: Cable and Wire Specifications for Ports
Device
Receptacle
Maximum
LengthCable/Wire RequiredCable SpecificationPort
RJ-456 ft (1.83 m)One 6-ft (1.83-m) length
with DB-9/RJ-45
connectors
RS-232 (EIA-232) serial
cable
Console
port
RJ-45328 ft (100
m)
One 15-ft (4.57-m)
length with RJ-45/RJ-45
connectors
CAT-5e (Category 5)
cable or equivalent
suitable for 100BASE-T
operation
Ethernet
port
Interface Cable and Wire Specifications for the SRX210 Services Gateway ■ 161