Network Router User Manual
Table 52: RJ-45 Connector Pinouts for Services Gateway Console Port (continued)
DescriptionSignalPin
Signal GroundGround5
Receive DataRXD6
Data Set ReadyDSR/DCD7
Clear to SendCTS8
Related Topics ■ Interface Cable and Wire Specifications for the SRX210 Services Gateway on
page 161
■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on
page 162
■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port on
page 163
■ SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory and PoE Version) on page 10
RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated
Convergence Services FXO and FXS Ports
The FXO and FXS ports use an RJ-11 cable.
Table 53 on page 164 describes the RJ-11 connector pinouts.
Table 53: RJ-11 Connector Pinouts
SignalPin
No connect1
No connect2
RJ P –Ring3
RJ N –Tip4
No connect5
No connect6
164 ■ RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated Convergence Services FXO and FXS Ports
SRX210 Services Gateway Hardware Guide