Network Router User Manual

CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and place the
other end of the strap around your bare wrist. Failure to use an ESD strap could result
in damage to the services gateway.
Related Topics ■ SRX210 Services Gateway Description on page 3
■ SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory and PoE Version) on page 10
■ Monitoring the SRX210 Services Gateway Components Using LEDs on page 120
■ SRX210 Services Gateway Electrical Safety Guidelines and Warnings on page 150
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory and PoE Version)
This topic contains views of the front panel and back panel of the SRX210 Services
Gateway high memory, low memory, and Power over Ethernet (PoE) versions. This
topic includes the following sections:
■ SRX210 Services Gateway Front Panel on page 10
■ SRX210 Services Gateway Back Panel on page 11
SRX210 Services Gateway Front Panel
Figure 3 on page 10 shows the front panel of the SRX210 Services Gateway.
Figure 3: SRX210 Services Gateway Front Panel
Table 6 on page 11 lists the front panel components of the services gateway.
NOTE: The numbers in Figure 3 on page 10 correspond to the numbers in Table 6
on page 11.
10 ■ SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory and PoE Version)
SRX210 Services Gateway Hardware Guide