Network Router User Manual

Table 10: SRX210 Services Gateway Built-In Hardware Interfaces
DescriptionSpecificationsInterface Type
The Gigabit Ethernet ports can
be used as follows:
■
To function as front-end
network ports
■
To provide LAN and
WAN connectivity to
hubs, switches, local
servers, and workstations
■
To forward incoming
data packets to the
device
■
To receive outgoing data
packets from the device
■
To connect power
devices to receive
network connectivity and
electric power (PoE
functionality) (For the
PoE and media gateway
model of the SRX210
Services Gateway)
■
Consist of two fixed ports
■
Are labeled as port
ge–0/0/0 and port
ge–0/0/1 on the front
panel
■
Use an RJ-45 connector
■
Provide link speeds of
10/100/1000 Mbps
■
Operate in full-duplex
and half-duplex modes
■
Support flow control
■
Support autonegotiation
and autosensing
Both Gigabit Ethernet ports
support Power over Ethernet
on the PoE and media gateway
models of the SRX210 Services
Gateway.
Gigabit Ethernet
The Fast Ethernet ports can
be used as follows:
■
To provide LAN
connectivity to hubs,
switches, local servers,
and workstations
■
To forward incoming
data packets to the
device
■
To receive outgoing data
packets from the device
■
To connect power
devices to receive
network connectivity and
electric power (PoE
functionality) (For the
PoE and media gateway
model of the SRX210
Services Gateway)
■
Consist of six fixed ports
■
Are labeled as port
fe–0/0/2 to port
fe–0/0/7 on the front
panel
■
Provide link speeds of
10/100 Mbps
■
Operate in full-duplex
and half-duplex modes
The first two Fast Ethernet
ports support Power over
Ethernet on the SRX210
Services Gateway (PoE version
and media gateway version).
Fast Ethernet
SRX210 Services Gateway Built-In Interfaces ■ 15
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications