Network Router User Manual

NOTE: The numbers in Figure 8 on page 20 correspond to the numbers in Table 12

on page 21.

Table 12 on page 21 describes the built-in Ethernet port LEDs.

Table 12: SRX210 Services Gateway Built-In Ethernet Port LEDs

DescriptionStateColorFunctionNumber

Link is active. Data

communication is taking place.

BlinkingGreenTX/RX/LINK

LED

Link is active. No data

communication is taking place.

Steady

Link is inactive.OffUnlit

PoE (Power over Ethernet) is on

and the connected power device

is receiving power.

SteadyGreenPoE LED2

PoE (Power over Ethernet) is on,

but the connected power device

is not receiving power (device

fault or not enough power).

SteadyYellow

PoE is off.OffUnlit

NOTE: The PoE LED is enabled only on the Power over Ethernet (PoE) model of the

SRX210 Services Gateway. For non-PoE models, the PoE LED remains off.

Voice Interface Port LED

On the SRX210 Services Gateway, each Voice Interface (FXO and FXS) port has a

single LED indicating the status.

Figure 9 on page 22 shows the SRX210 Services Gateway Voice Interface port LEDs.

SRX210 Services Gateway LEDs ■ 21

Chapter 2: SRX210 Services Gateway Hardware Components and Specifications