Network Router User Manual

Figure 9: SRX210 Services Gateway Voice Interface Port LEDs
Table 13 on page 22 describes the Voice Interface port LEDs.
Table 13: SRX210 Services Gateway Voice Interface Port LEDs
DescriptionStateColorLED
Port is inactive.UnlitOffVoice Interface
LEDs
(FXS1, FXS2,
FXO1, and FXO2)
Port is connected and active.SteadyGreen
Port is active and not ready
for data communication.
OnAmber
Port is active and data
communication is taking
place.
BlinkingGreen
Port is initializing.
NOTE: The Voice Interface
port LEDs glow red (blinking)
while initializing. If there is an
error, the LEDs remain red;
otherwise, change to green.
BlinkingRed
Port has detected a hardware
initialization failure.
SteadyRed
Related Topics ■ SRX210 Services Gateway Specifications on page 7
■ SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory and PoE Version) on page 10
■ SRX210 Services Gateway with Integrated Convergence Services Front Panel
and Back Panel Views on page 12
■ SRX210 Services Gateway Built-In Interfaces on page 14
■ SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on
page 23
22 ■ SRX210 Services Gateway LEDs
SRX210 Services Gateway Hardware Guide