Network Router User Manual

Figure 14: Installing 3G ExpressCard in the SRX210 Services Gateway
3. Insert the 3G ExpressCard slowly and firmly into the ExpressCard slot until the
3G ExpressCard is engaged in the slot as follows:
■ The 3G ExpressCard is designed to fit tightly in the slot. You will encounter
two points of resistance while inserting the 3G ExpressCard into the slot.
Use firm pressure as you insert the card.
■ You will encounter the first point of resistance when you begin to insert the
3G ExpressCard. After you align the 3G ExpressCard, lift the card slightly
and use firm pressure to slide it into the slot.
■ When you have partially inserted the 3G ExpressCard, you will encounter
the second point of resistance. Use additional pressure to finish inserting
the 3G ExpressCard into the slot.
Related Topics SRX210 Services Gateway 3G ExpressCard Overview on page 29■
■ SRX210 Services Gateway 3G ExpressCard Basic CLI Commands on page 33
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
Table 16 on page 33 lists the basic CLI commands for operating the 3G ExpressCard
on the SRX210 Services Gateway.
The 3G wireless interface uses the prefix cl in the syntax cl-slot-number/0/port number.
Table 16: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
CommandAction
show modem wireless interface cl-0/0/8
show interfaces terse
Checks the status of the 3G ExpressCard.
CDMA ExpressCards
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands ■ 33
Chapter 3: SRX210 Services Gateway 3G ExpressCard