Network Router User Manual

Table 16: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands (continued)
CommandAction
request modem wireless activate
■
request modem wireless activate iota cl-0/0/8
■
request modem wireless activate manual
cl-0/0/8 msl MSL value mdn MDN value imsi
IMSI value sid SID value nid NID value
sip-user-id SIP ID sip-password SIP_PASSWORD
■
request modem wireless activate otasp
cl-0/0/8 dial-string calling number
Activates the CDMA ExpressCard
■
IOTA — Activates Internet-based over
air provisioning .
■
Manual activation — Requires manual
entry of the required information.
■
OTASP — Activates over the air service
provisioning.
GSM
request modem wireless gsm sim-unlock cl-0/0/8
pin
Unlocks the GSM SIM.
set interfaces cl-0/0/ 8 cellular-options gsm-options
sim-unlock-code
Unlocks the SIM automatically on reboot
request modem wireless gsm sim-unblock cl-0/0/8
puk puk numberpin new pin number
NOTE: You must obtain the PUK value from your
cellular service provider.
Recovers the SIM from the Pin Unlock Key
(PUK) state
When you attempt to unlock the SIM, if you
enter a wrong PIN three times in a row, the
SIM enters the PUK state.
request modem wireless gsm change-pin cl-0/0/8
old-pin current pin new-pin new pin
Changes the PIN on the SIM.
For more information about configuring the 3G wireless interface, see JUNOS Software
Interfaces and Routing Configuration Guide.
Related Topics ■ SRX210 Services Gateway 3G ExpressCard Overview on page 29
■ Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot
on page 32
34 ■ SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
SRX210 Services Gateway Hardware Guide