Network Router User Manual

NOTE: The 2-Port FXS/2-Port FXO Mini-PIM and the 4-Port FXO Mini-PIM does not
support failover relay between any of the FXS and FXO ports.
■ Telephony interface expansion available through Mini-PIM interface card option
includes a 2–Port FXS/2–Port FXO Mini-PIM, 4–Port FXO Mini-PIM, and an IP
Flex T1/E1 Mini-PIM with initial support for T1-CAS (loopstart only).
NOTE: For more information on Mini-PIMs, see the SRX Series Services Gateways for
the Branch Physical Interface Modules Hardware Guide.
Related Topics About the SRX210 Services Gateway with Integrated Convergence Services on
page 39
■
■ SRX210 Services Gateway Integrated Convergence Services Interoperability on
page 42
■ Configuring the SRX210 Services Gateway with Integrated Convergence Services
on page 43
SRX210 Services Gateway Integrated Convergence Services Interoperability
The SRX210 Services Gateway with Integrated Convergence Services aligns with the
open convergence architecture and supports different brands of call servers and SIP
phones.
Table 19 on page 42 summarizes the SIP phones, softphones, and analog devices
supported by SRX210 Services Gateway with Integrated Convergence Services.
Table 19: SRX210 Services Gateway Integrated Convergence Services Interoperability
DevicesPhone Types
■
Avaya 4600 and 9600 series
■
Polycom 300 and 500 series
■
Snom 300 series
■
Microsoft OCS-compatible phones
■
Cisco Unified SIP phones 7960 and 7961
SIP phones
■
SNOM 360
■
Microsoft OCS client
■
X-Lite EyeBeam Mini-SIP
■
Avaya one-x
Softphones
42 ■ SRX210 Services Gateway Integrated Convergence Services Interoperability
SRX210 Services Gateway Hardware Guide