Network Router User Manual
■ Installation Overview for the SRX210 Services Gateway on page 57
■ SRX210 Services Gateway Cabinet Requirements on page 51
■ SRX210 Services Gateway Rack Requirements on page 52
■ Clearance Requirements for Airflow and Hardware Maintenance of the SRX210
Services Gateway on page 54
General Site Guidelines for Installing the SRX210 Services Gateway
The following precautions help you plan an acceptable operating environment for
your SRX210 Services Gateway and avoid environmentally caused equipment failures:
■ For the cooling system to function properly, the airflow around the chassis must
be unrestricted. Allow sufficient clearance between the front and back of the
chassis and adjacent equipment. Ensure that there is adequate circulation in the
installation location.
■ Follow the ESD procedures to avoid damaging equipment. Static discharge can
cause components to fail completely or intermittently over time.
■ Ensure that the blank Mini-PIM panel is installed in the empty slot to prevent
any interruption or reduction in the flow of air across internal components.
NOTE: Install the device only in restricted areas, such as dedicated equipment rooms
and equipment closets, in accordance with Articles 110–16, 110–17, and 110–18
of the National Electrical Code, ANSI/NFPA 70.
Related Topics ■ SRX210 Services Gateway Specifications on page 7
■ SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines on
page 69
■ SRX210 Services Gateway Cabinet Requirements on page 51
■ SRX210 Services Gateway Rack Requirements on page 52
■ Site Preparation Checklist for the SRX210 Services Gateway on page 49
■ Clearance Requirements for Airflow and Hardware Maintenance of the SRX210
Services Gateway on page 54
SRX210 Services Gateway Cabinet Requirements
The SRX210 Services Gateway can be installed in a standard 800 mm (31.5 in.) or
larger enclosed cabinet. Table 21 on page 52 provides the details on cabinet size,
clearance, and airflow requirements.
General Site Guidelines for Installing the SRX210 Services Gateway ■ 51
Chapter 7: Preparing the Site for the SRX210 Services Gateway Installation