Network Router User Manual

against the items on the packing list. The packing list specifies the part numbers and

descriptions of each part in your order.

If any part is missing, contact your Juniper Networks customer service representative.

A fully configured SRX210 Services Gateway contains the chassis with installed

components, listed in Table 26 on page 62, and an accessory box, which contains

the parts listed in Table 27 on page 62.

NOTE: The parts shipped with your device can vary depending on the configuration

you ordered.

Table 26: Parts List for a Fully Configured SRX210 Services Gateway

QuantityComponent

■

For Low Memory model (SRX210B):

SRX210 Services Gateway with 2xGE + 6xFE ports,

1xMini-PIM slot, and base memory (512 MB RAM, 1GB

Flash)

■

For High Memory model (SRX210H):

SRX210 Services Gateway with 2xGE + 6xFE ports,

1xMini-PIM slot, and high memory (1GB RAM, 1GB

Flash)

■

For PoE model (SRX210H-POE):

SRX210 Services Gateway with 2xGE + 6xFE ports,

1xMini-PIM slot, high memory (1GB RAM, 1GB Flash),

4 ports of POE 802.11AT (50 watts across 4 ports)

■

For Voice model (SRX210H-P-MGW):

SRX210 Services Gateway with 2xGE + 6xFE ports,

1xMini-PIM slot, high memory (1GB RAM, 1GB Flash),

4 ports POE (50 watts) and Media Gateway with 2 FXO

and 2 FXS ports

■

Power supply adapter (60 watts for Low Memory and

High Memory models)

■

Power supply adapter (150 watts for PoE and Voice

models)

13-Prong Power Cord

1DB-9 to RJ-45 Adapter, Straight Through, 7 feet

Table 27: Accessory Parts List for the SRX210 Services Gateway

QuantityPart

1Juniper Networks Product Warranty

1End User License Agreement

62 ■ Verifying Parts Received with the SRX210 Services Gateway

SRX210 Services Gateway Hardware Guide