Network Router User Manual

Related Topics ■ Site Preparation Checklist for the SRX210 Services Gateway on page 49
■ Clearance Requirements for Airflow and Hardware Maintenance of the SRX210
Services Gateway on page 54
■ Unpacking the SRX210 Services Gateway on page 61
■ Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 66
■ Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 68
Preparing the SRX210 Services Gateway for Wall-Mount Installation
You can mount an SRX210 Services Gateway on a wall. The four rubber feet attached
to the chassis provide stability.
Table 30 on page 68 provides the list of tasks you need to perform before installing
the device.
Table 30: SRX210 Services Gateway Preinstallation Checklist for Wall-Mount
Installation
Additional InformationTask
“Site Preparation Checklist for the
SRX210 Services Gateway” on page 49
Verify that the site meets the requirements.
“Unpacking the SRX210 Services
Gateway” on page 61
Remove the services gateway chassis from the
shipping carton.
Verify that you have the following parts available in
your wall-mounting kit to mount the SRX210 Services
Gateway on wall:
■
Wall-mounting brackets
■
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be ordered
separately.
Related Topics ■ Site Preparation Checklist for the SRX210 Services Gateway on page 49
■ Unpacking the SRX210 Services Gateway on page 61
■ Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 66
■ Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 67
68 ■ Preparing the SRX210 Services Gateway for Wall-Mount Installation
SRX210 Services Gateway Hardware Guide