Network Router User Manual

Chapter 12
Installing the SRX210 Services Gateway
This chapter includes the following topics:
■ SRX210 Services Gateway Safety Requirements, Warnings, and
Guidelines on page 69
■ SRX210 Services Gateway Installation on page 69
■ Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services
Gateway on page 78
SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the
guidelines for working with and near electrical equipment, as well as the safety
procedures for working with devices. For a discussion of how to make the installation
site a safe environment and a list of safety warnings, see the Appendix for Safety
and Regulatory Compliance Information.
NOTE: Providing an exhaustive set of guidelines for working with electrical equipment
is beyond the scope of this guide.
Related Topics ■ General Site Guidelines for Installing the SRX210 Services Gateway on page 51
■ Required Tools and Parts for Installing and Maintaining the SRX210 Services
Gateway on page 59
■ Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and
Wall-Mount Installation on page 65
■ General Site Guidelines for Installing the SRX 210 Services Gateway
SRX210 Services Gateway Installation
You can install the SRX210 Services Gateway in a rack, on a desk, or on a wall. The
device includes rubber feet for desk and wall mounting. The mounting brackets are
optional accessories.
SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines ■ 69