Terms and Conditions
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- About This Topic Collection
- Part 1: Access Point Overview and Components
- Part 2: Planning for Access Point Installation
- Part 3: Safety Guidelines and Standards for Access Point Installation
- Part 4: Requirements and Certifications
- Part 5: Installing, Connecting, and Verifying the Access Point
- Chapter 7: Installing and Connecting the Access Point
- Installation Instructions Warning
- Unpacking a WLA532E Access Point
- Parts Inventory (Packing List) for a WLA532E Access Point
- Installing the WLA532E Access Point on a Ceiling Rail
- Installing the WLA532E Access Point Using the Plenum Bracket Kit
- Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy Mounting Bracket Adapter Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA Wall-Mount Kit
- Connecting the Access Point to Wireless LAN Controllers
- Chapter 8: Verifying the Health of the Access Point
- Chapter 9: Customer Support
- Chapter 7: Installing and Connecting the Access Point
Table 10: 2.4-GHz Radio Receive Sensitivities
2.4-GHz Radio Receive Sensitivities (in dBm)
HT-20Legacy "g"Legacy "b"Legacy "a"
MCS23MCS16MCS15MCS8MCS7MCS054
Mbps
6
Mbps
11
Mbps
1
Mbps
54
Mbps
6
Mbps
-71-93-71-93-71-93-77-93-88-95-75-91
Related
Documentation
Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point on
page 32
•
• WLA Series Access Point Radio Frequency Exposure Guidelines on page 37
• WLA532E Antenna Models on page 7
Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point
The 5-GHz band radio is operational from channels 36 through 165 in legacy IEEE standard
802.11n 3x3 or IEEE 802.11n 3x3 from single to three spatial streams of 20 MHz and 40
MHz channel modes. At an MCS0 data rate, it provides 16 dBm transmit power per chain
and has a receive sensitivity of -88 dBm. At an MCS23 data rate, it provides 10 dBm
transmit power per chain and has a receive sensitivity of -65 dBm. The 5-GHz radio
consumes maximum power rate of 4.25W.
Each antenna connector on the WLA532E can support any external single or dual band
elements. The access point has been designed to maximize isolation between all
antennas. For 5-GHz and 2.4-GHz concurrent operation, the antenna can support a
co-band isolation of -15dB at 2.4GHz and -30dB at 5GHz.
Table 2 on page 7 lists the supported antenna models.
Table 11: WLA532E Antenna Models
Vertical BWHorizontal BWGainType
Juniper Model
Number
5GHz2.4GHZ5GHz2.4GHZ5GHz2.4GHZ
60°60°360°360°4dBi3dBiOmni (Paddle)
Non-Plenum
WLA-ANT-7360P-IN
15°22°360°360°8dBi6dBiOmniANT-7360A-OUT
60°70°55°75°10.7dBi8dBiPanelANT-77555-OUT
Copyright © 2012, Juniper Networks, Inc.32
WLA532E Access Point Hardware Documentation