Terms and Conditions
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- About This Topic Collection
- Part 1: Access Point Overview and Components
- Part 2: Planning for Access Point Installation
- Part 3: Safety Guidelines and Standards for Access Point Installation
- Part 4: Requirements and Certifications
- Part 5: Installing, Connecting, and Verifying the Access Point
- Chapter 7: Installing and Connecting the Access Point
- Installation Instructions Warning
- Unpacking a WLA532E Access Point
- Parts Inventory (Packing List) for a WLA532E Access Point
- Installing the WLA532E Access Point on a Ceiling Rail
- Installing the WLA532E Access Point Using the Plenum Bracket Kit
- Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy Mounting Bracket Adapter Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA Wall-Mount Kit
- Connecting the Access Point to Wireless LAN Controllers
- Chapter 8: Verifying the Health of the Access Point
- Chapter 9: Customer Support
- Chapter 7: Installing and Connecting the Access Point
•
Wall-mount bracket–provided in the WLA-BRKT-WALL kit)
NOTE: The wall-mount bracket extends the access point 1.5 inches from
the wall to accommodate the Ethernet cable bend radius.
Figure 31: Wall-Mount Bracket Dimensions-–WLA-BRKT-WALL
128.10mm
83.34mm
72.54mm
15.57mm
g060023
The cable opening can be installed on the
top or bottom depending on the mounting
orientation of the bracket.
Side cable opening
27.98mm
Wall bracket mount
hole diameter: 3.96mm
•
Two flat-tip, flat-head screws–provided in the WLA-BRKT-WALL kit)
•
Faceplate–provided in the WLA-BRKT-WALL kit)
•
Flat-head screwdriver (not provided)
•
Category 5 cable, installed (not provided)
•
Two M3 or 6-32 wall anchors (not provided)
•
Wall-mount template (part number 530-043682, provided in the WLA-BRKT-WALL
kit)
•
(Optional) Security kit, which includes a security tool and a security screw (The kit is
not provided; you can order it separately at
https://www.juniper.net/customers/support/.)
65Copyright © 2012, Juniper Networks, Inc.
Chapter 7: Installing and Connecting the Access Point