User guide

Technical Reference Page 8-7
Operating Modes: Quick Reference
Mode Submode Format Function
0 EXECUTE PROGRAM Execute a Polycode program.
FILE:
1 EDIT 1,2,3 Edit a data, format, or program file.
DAT,FMT,PGM
1 1 EDIT DAT Create or edit a data file.
1 2 EDIT FMT Create or edit a format file.
1 3 EDIT PGM Create or edit a program file.
2 XMIT SER 1,2,3 Transmit data, a file, or a memory
DATA,FILE,MEM image through the serial port to a
computer, printer, or FieldBook
2 1 XMIT SER DATA Transmit data through the serial port.
2 2 XMIT SER FILE Transmit a file through the serial port.
2 3 XMIT SER MEM Transmit a memory image through the
serial port.
3 LOAD SER 1,2,3 Load data, a file, or a memory image
DATA,FILE,MEM into the FieldBook from a computer or
another FieldBook via the serial port.
3 1 LOAD SER DATA Load data via the serial port.
3 2 LOAD SER FILE Load a file via the serial port.
3 3 LOAD SER MEM Load memory image via the serial port.
4 FILE 1,2,3 Review the file directory, erase a file, or
DIR, ERA-F, ERA-D erase the data within a file.
4 1 FILE DIR Review the file directory.
4 2 FILE ERA-F Erase a file.
4 3 FILE ERA-D Erase the data within a file (not the file).