Owner's Manual

Chapter 1 Getting Started 7
Stylus Tether
Attach one end of the stylus tether to the stylus. To attach
the tether to the tablet, follow these steps:
1. Attach one end of the stylus tether to the stylus.
2. Push the free tether loop through one of the tether
attachment points located on the side of any of the four
corners.
3. Insert the stylus with the attached tether through this
loop and tighten the loop.
4. Place the stylus into the stylus storage slot located on
the bottom of the Mesa 3.
Turn the Mesa 3 on and Off
To turn the Mesa 3 on, press and release the power key .
The tablet powers on and begins the startup process. The
rst time you do this, you are asked to set up your device
and create or sign into a Google account.
When startup is complete, the Lock screen is shown. Swipe
up from the bottom of the screen to unlock it. The Home
screen is shown.
To power the Mesa 3 off, press the power key for a few
seconds until a menu is shown with these selections:
 Power off
 Restart
 Screenshot
Select Power off.