Owner's Manual

Chapter 3 Optional Features and Accessories 31
How to Use the Dock
1. On the Mesa 3, make sure Auto-rotate is turned on (see
Chapter 2, Auto-rotate the Screen).
2. Provide power to the dock using the 30 W AC wall
charger provided with your Mesa 3 (the ports require
external power). A 45 W charger is available as an
option, and we recommend this charger if you are using
the dock as an ofce computer with several peripheral
functions. The 30 W AC wall charger might not provide
enough power to charge the batteries and run the
Mesa 3.
3. Plug in the cables for your desired setup.
4. If a hand strap is covering the pin contacts on the Mesa
3, unhook one end or remove it.
5. Hold the Mesa 3 in portrait mode with the docking pin
contacts facing down. Place it over the dock alignment
pins and press down until you feel and hear the lock
engage.
6. To remove the Mesa 3 from the dock, press on the
release button and pull the Mesa 3 up.
Adding a Video Monitor or Projector
To connect to a video monitor to the Mesa 3, plug the
device into the HDMI port.
Mounting the Dock to a Surface
The Ofce Docking Station is freestanding. It can also be
mounted to a surface like a desk or shelf. There are keyhole
slots on the bottom for this purpose.
4” (101.5 mm)
.175” (4.445 mm)
.125” (3.175 mm)
.350” (8.89 mm)