Datasheet

Then, perform the following procedures to install the router:

NOTE: If you are installing multiple routers in one rack, install the lowest one

first and proceed upward in the rack.

1. If you are center-mounting the router, move the mounting brackets on the chassis as

described in “Moving the Mounting Brackets” on page 48.

2. Have one person grasp each side of the router, lift the router, and position it in the

rack.

3. Align the bottom hole in both mounting brackets with a hole in each rack rail, making

sure the chassis is level.

4. Install one of the mounting screws provided (in the accessory box shipped with the

router) into each of the two aligned holes. Use a Phillips screwdriver to tighten the

screws.

Figure 27: Installing the Router

5. Install the second screw in each mounting ear.

M7i Multiservice Edge Router Hardware Guide