User Guide

• Dashboards to view of a set of operaonal dashboards and reports.
• Device Onboarding to perform device onboarding to iniate data collecon.
• Device Nocaons to view nocaons about device onboarding, data collecon, and errors.
• Collector to view the details of the LWC associated with the account.
View the Lightweight Collector Connecon Status
IN THIS SECTION
View the Connecon Status on Juniper Support Portal | 10
View the Connecon Status on the Capve Portal | 10
You can view the Lightweight Collector (LWC) connecon status on the following portals:
• Juniper Support Portal
• The LWC capve portal. The capve portal provides a more detailed view, and has opons that let you change the
LWC conguraon sengs and perform troubleshoong.
View the Connecon Status on Juniper Support Portal
Here's how to view the LWC connecon status on Juniper Support Portal:
1. On Juniper Support Portal, click Insights > Collector.
2. Check the summary table to see the Connecon Status of the LWC. The status should be shown as Connected.
If the status is shown as Disconnected, check if the LWC is installed and the two ports are cabled correctly. Ensure
that the LWC fullls the Internal and External Network Requirements as specied in the LWC Plaorm Hardware
Guide. In parcular, ensure that the LWC meets the Outbound Connecvity Requirements.
View the Connecon Status on the Capve Portal
See
"Congure the Lightweight Collector" on page 6 for more informaon.
10