User Guide

What Else Do I Need? | 3
The Lightweight Collector (LWC) is a data collecon tool that gathers operaonal data from Juniper devices on
customer networks. JSI uses this data to provide IT and network operaons teams with aconable operaonal insights
into the onboarded Juniper devices on customer networks.
You can install the LWC on your desktop, in a two-post or four-post rack. The accessory kit that ships in the box has the
brackets you need to install the LWC in a two-post rack. In this guide, we show you how to install the LWC in a two-
post rack. If you need to install the LWC in a four-post rack, you’ll need to order a four-post rack mount kit.
What's in the Box?
• The LWC device
• AC power cord for your geographic locaon
• AC power cord retainer clip
• Two rack mount brackets
• Eight mounng screws to aach the mounng brackets to the LWC
• Two SFP modules (2 x CTP-SFP-1GE-T)
• RJ-45 cable with a DB-9 to RJ-45 serial port adapter
• Four rubber feet (for desktop installaon)
What Else Do I Need?
• Someone to help you mount the LWC in the rack.
• Four rack mount screws to secure the mounng brackets to the rack
• A number 2 Phillips (+) screwdriver
Mount a Lightweight Collector on Two Posts in a Rack
You can mount a Lightweight Collector (LWC) on two posts of a 19-in. rack (either a two-post or a four-post rack).
Here's how to mount the LWC on two posts in a rack:
3