User Guide

NOTE: If the default DHCP conguraon on the LWC is successful, the capve portal shows the LWC's
connecon status as connected, and populates the elds in all the conguraons secons appropriately.
Click Refresh to refresh the current connecon states.
The JSI Data Collector page displays conguraon secons for the following:
• External Network—Lets you congure external network port that connects the LWC to the Juniper's Cloud.
Supports DHCP and stac addressing. The External Network conguraon is used to perform device
provisioning.
• Internal Networks—Lets you congure the internal network port that connects the LWC to the Juniper devices on
the network. Supports DHCP and stac addressing.
• Acve Proxy—Lets you congure the acve proxy IP address as well as the port number if your network
infrastructure controls access to the Internet though an acve proxy. You need not congure this element if you
are not using an acve proxy.
5. Click the Edit buon under the element that needs to be updated.
You need to modify the elds in:
• The Internal Network and External Network secons if their connecon states indicate that they are
disconnected.
• The
Acve Proxy secon if you are using an acve proxy.
7