Datasheet

ManualsBrandsJuniper Manualscomputer componentsJX-2E1-RJ48-S

DATASHEET

Product Description

The Juniper Networks Dual-port T1/E1 PIM provides the physical connection to T1 or E1

network media types, receiving incoming packets from the network and transmitting

outgoing packets to the network. The Dual-port T1/E1 PIM is equipped with a dedicated

network processor that forwards incoming data packets to the Routing Engine, and

receives outgoing data packets from the Routing Engine. During this process, the PIM

performs T1 or E1 framing and line-speed signaling.

When a Dual-port T1/E1 PIM is installed in a Juniper Networks

SSG Series Secure Services

Gateway running ScreenOS

Software, the dedicated network processor will forward

traffic to the SSG Series CPU where traffic decisions are made based upon security

policies.

Features and Beneﬁts

Dual-port T1/E1 PIM provides the following beneﬁts:

• Dual-port form factor allows for increased bandwidth capabilities while making

effective use of the J Series and SSG Series modular interface slots.

• Integrated channel service unit/data service unit (CSU/DSU) eliminates the need to

deploy a separate external device, saving valuable space and simplifying management.

Features

• Fully integrated CSU/DSU

• Full and fractional T1/E1 capabilities

• Onboard network processor

• 56K and 64K modes support

• ANSI T1.102, T1.107, T1.403 T1 support

• G.703, G.704, and G.706 E1 support

• Independent clock

• Loopback, bit error rate test (BERT), facilities data link (FDL) (T1 only),

Product Overview

Dual-port T/E1 Physical Interface

Module (PIM) are for use with the

Juniper Networks J2320, J2350, J4350,

and J6350 Services Routers, as well

as the Juniper Networks SSG140,

SSG320M, SSG350M, SSG520M and

SSG550M Secure Services Gateways.

DUAL-PORT

T1/E1 PHYSICAL

INTERFACE MODULE

Summary of content (4 pages)

PAGE 1
DATASHEET DUAL-PORT T1/E1 PHYSICAL INTERFACE MODULE Product Overview Dual-port T/E1 Physical Interface Module (PIM) are for use with the Juniper Networks J2320, J2350, J4350, and J6350 Services Routers, as well as the Juniper Networks SSG140, Product Description The Juniper Networks Dual-port T1/E1 PIM provides the physical connection to T1 or E1 network media types, receiving incoming packets from the network and transmitting outgoing packets to the network.
PAGE 2
Diagnostics and long build-out diagnostics Specifications Loopbacks Product Specifications • Local, remote, payload Test Patterns (BERT) Dimensions and Weight (W x H x D) • All ones • 5.45 x 0.63 x 6.5 in (13.8 x 1.6 x 16.5 cm) • All zeros Network Interface Specifications • Alternating ones and zeros (AA/55) DUAL-PORT T1 DUAL-PORT E1 Transmit bit rate 1.544 Mbps 2.048 Mbps Receive bit rate 1.544 Mbps 2.
PAGE 3
Standards and Compliance Juniper Networks Services and Support Safety Juniper Networks is the leader in performance-enabling services • CAN/CSA-C22.2 No. 60950/UL 60950 Third Edition, Safety of Information Technology Equipment • EN 60950 (2000) Third Edition, Safety of Information Technology Equipment EMC (Emissions) • FCC Part 15 Class B • EN 55022 Class B that are designed to accelerate, extend, and optimize your high-performance network.
PAGE 4
Corporate and Sales Headquarters APAC Headquarters EMEA Headquarters To purchase Juniper Networks solutions, Juniper Networks, Inc. Juniper Networks (Hong Kong) Juniper Networks Ireland please contact your Juniper Networks 1194 North Mathilda Avenue 26/F, Cityplaza One Airside Business Park Sunnyvale, CA 94089 USA 1111 King’s Road Swords, County Dublin, Ireland representative at 1-866-298-6428 or Phone: 888.JUNIPER (888.586.4737) Taikoo Shing, Hong Kong Phone: 35.31.8903.600 or 408.745.