T4000 Core Router Interface Module Reference August 2013 This guide provides an overview and description of the PICs supported by the Juniper Networks T4000 Core Router. Contents T4000 PIC Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 T4000 PICs Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ATM IQ PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T4000 Core Router Interface Module Reference Gigabit Ethernet IQ PIC with SFP (T4000 Router) . . . . . . . . . . . . . . . . . . . . . . . . 59 Gigabit Ethernet IQ2 PICs with SFP (T4000 Router) . . . . . . . . . . . . . . . . . . . . . . . 61 Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP (T4000 Router) . . . . . . . . . 65 10-Gigabit Ethernet DWDM OTN EOL PIC (T4000 Router) . . . . . . . . . . . . . . . . . 68 10-Gigabit Ethernet IQ2 PIC with XFP (T4000 Router) . . . . . . . . . . . . . . . . . . . . .
T4000 PIC Description T4000 PIC Description PICs provide the physical connection to various network media types, receiving incoming packets from the network and transmitting outgoing packets to the network. During this process, each PIC performs framing and line-speed signaling for its media type. Before transmitting outgoing data packets, the PICs encapsulate the packets received from the FPCs. Each PIC is equipped with an ASIC that performs control functions specific to the media type of that PIC.
T4000 Core Router Interface Module Reference T4000 PICs Supported Table 2 on page 4 through Table 9 on page 7 list the PICs supported by the T4000 router by PIC family. The First Junos OS Release Support column indicates the first release the PIC was supported on the T4000 router. NOTE: End of life (EOL) indicates that the product has been removed from the price list and is no longer available for purchase.
T4000 PICs Supported Table 3: Channelized IQ PICs Supported in the T4000 Router PIC Family and Type Ports Model Number Connectors First Junos OS Release Support “Channelized DS3 IQ PIC (T4000 Router)” on page 20 4 PB-4CHDS3-QPP Coaxial 12.1R2 “Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router)” on page 36 4 PB-4CHOC12-STM4-IQE-SFP Optical: LC 12.2R1 4 PC-4CHOC12-STM4-IQE-SFP Optical: LC 13.
T4000 Core Router Interface Module Reference Table 5: 10-Gigabit Ethernet PICs Supported in the T4000 Router PIC Family and Type Ports Model Number Connectors First Junos OS Release Support “10-Gigabit Ethernet PIC with XENPAK (T4000 Router)” on page 76 1 PC-1XGE-XENPAK Optical: SC 12.2R2 “10-Gigabit Ethernet DWDM OTN EOL PIC (T4000 Router)” on page 68 1 PC-1XGE-DWDM-OTN Optical: SC 12.
T4000 PICs Supported Table 7: 100-Gigabit Ethernet PICs Supported in the T4000 Router First Junos OS Release Support PIC Family and Type Ports Model Number Connectors “100-Gigabit Ethernet PIC with CFP (T4000 Router)” on page 92 1 PF-1CGE-CFP Optical: SC, LC, or 24-fiber MPO depending on the transceiver. See the PIC description for more information. 12.1 1 PD-1CE-CFP-FPC4 (PIC and FPC) Optical: SC, LC, or 24-fiber MPO depending on the transceiver. See the PIC description for more information.
T4000 Core Router Interface Module Reference Table 9: SONET/SDH PICs Supported in the T4000 Router (continued) PIC Family and Type Ports Model Number Connectors First Junos OS Release Support “SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T4000 Router)” on page 107 4 PB-4OC3-4OC12-SON-SFP Optical: LC 12.2R2 “SONET/SDH OC48c/STM16 PIC with SFP (T4000 Router)” on page 113 4 PC-4OC48-SON-SFP Optical: LC 12.
T4000 FPCs Supported T4000 FPCs Supported T4000 Core Routers support the FPCs listed in Table 10 on page 9. You can install any combination of the following FPCs. The First Junos OS Release Supported column indicates the first release that the FPC is supported in the T4000 router.
T4000 Core Router Interface Module Reference T4000 PIC/FPC Compatibility The PIC/FPC compatibility matrixes list the current PICs for the T4000 router. For example, Junos OS Release 12.1 is the first release in which the T1600-FPC4-ES supports the OC192/STM64, 4-port PIC in the T4000 router.
T4000 PIC/FPC Compatibility Table 11: T4000 PIC/FPC Compatibility Type 1 (continued) Type 1 PIC PIC Model Number T640-FPC1-ES “Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router)” on page 36 PB-1CHOC12-STM4-IQE-SFP 12.1.R2 PB-4DS3-E3-IQE-BNC 12.1.R2 DS3 and E3 PICs “DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router)” on page 48 Fast Ethernet and Gigabit Ethernet PICs “Fast Ethernet PIC (T4000 Router)” on page 51 PB-4FE-TX 12.1.
T4000 Core Router Interface Module Reference Table 12: T4000 PIC/FPC Compatibility Type 2 (continued) Type 2 PIC PIC Model Number T640-FPC2-ES “ATM2 OC12/STM4 IQ PIC (T4000 Router)” on page 17 PB-2OC12-ATM2-SMIR 12.2.R1 “Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router)” on page 36 PB-4CHOC12-STM4-IQE-SFP 12.2R2 “Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router)” on page 41 PB-1CHOC48-STM16-IQE-SFP 12.2R2 PB-2GE-SFP 12.2R2 PB-4GE-SFP 12.
T4000 PIC/FPC Compatibility Table 12: T4000 PIC/FPC Compatibility Type 2 (continued) Type 2 PIC PIC Model Number T640-FPC2-ES “SONET/SDH OC48c/STM16 EOL PIC with SFP (T4000 Router)” on page 116 PB-1OC48-SON-SFP 12.2R2 “SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP (T4000 Router)” on page 122 PB-1OC48-SON-B-SFP 12.2R2 PIC/FPC Compatibility (Type 3) Table 13 on page 13 provides a PIC/FPC compatibility matrix for the current Type 3 PICs for the T4000 router and Type 3 FPCs.
T4000 Core Router Interface Module Reference Table 13: T4000 PIC/FPC Compatibility Type 3 (continued) Type 3 PIC PIC Model Number T640-FPC3-ES “10-Gigabit Ethernet PIC with XENPAK (T4000 Router)” on page 76 PC-1XGE-XENPAK 12.2R2 “10-Gigabit Ethernet DWDM OTN EOL PIC (T4000 Router)” on page 68 PC-1XGE-DWDM-OTN 12.1R2 “10-Gigabit Ethernet IQ2 PIC with XFP (T4000 Router)” on page 70 PC-1XGE-TYPE3-XFP-IQ2 12.
T4000 PIC/FPC Compatibility PIC/FPC Compatibility (Type 4) Table 14 on page 15 provides a PIC/FPC compatibility matrix for the current Type 4 PICs for the T4000 router and Type 4 FPCs. Table 14: T4000 PIC/FPC Compatibility Type 4 Type 4 PIC PIC Model Number T640-FPC4-1P-ES T1600-FPC4-ES “10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router)” on page 81 PD-5-10XGE-SFPP 12.1R2 12.1 “10-Gigabit Ethernet LAN/WAN PIC with XFP (T4000 Router)” on page 86 PD-4XGE-XFP 12.1R2 12.
T4000 Core Router Interface Module Reference Table 15: T4000 PIC/FPC Compatibility Type 5 Type 5 PIC PIC Model Number T4000-FPC5-3D T4000-FPC5-LSR “10-Gigabit Ethernet LAN/WAN PIC with SFP+ (T4000 Router)” on page 78 PF-12XGE-SFPP 12.1 12.3R2 “10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router)” on page 81 PF-24XGE-SFPP 12.2 12.3R2 PF-1CGE-CFP 12.1 12.
ATM2 OC12/STM4 IQ PIC (T4000 Router) ATM2 OC12/STM4 IQ PIC (T4000 Router) Figure 1: 2-Port ATM2 OC12/STM4 IQ PIC Software release • 2-port: Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features • Two OC12 ports • Power requirement: 0.52 A @ 48 V (25 W) • Fine-grained queuing per logical interface • Conforms to ANSI T1.105-1991 and T1E1.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Circuit cross-connect for leveraging ATM access networks • User-configurable virtual circuit (VC) and virtual path (VP) support • Support for idle cell or unassigned cell transmission • OAM fault management processes alarm indication signal (AIS), remote defect indication (RDI), and loop cells • Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP • Local and remote loopback • ATM
ATM2 OC12/STM4 IQ PIC (T4000 Router) Alarms, errors, and events Related Documentation • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Loss of cell delineation (LOC) • Loss of frame (LOF) • Loss of pointer (LOP-P) • Loss of signal (LOS) • Payload mismatch (PLM-P) • Payload unequipped (unequipped STS at path level) (UNEQ-P) • Remote defect indication—line (RDI-L) • Remote
T4000 Core Router Interface Module Reference Channelized DS3 IQ PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 20 • Four DS3 ports • Power requirement: 0.32 A @ 48 V (15.
Channelized DS3 IQ PIC (T4000 Router) Software features • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB • Dynamic, arbitrary channel configuration • Encapsulations: • Circuit cross-connect (CCC) • Translational cross-connect (TCC) • Frame Relay • High-Level Data Link Control (HDLC) • Point-to-Point Protocol (PPP) Cables and connectors • L
T4000 Core Router Interface Module Reference g002620 Channelized DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router) Software features • Maximum transmission units (MTUs) of up to 9000 bytes • Dynamic, arbitrary channel configuration • Subrate and scrambling: NOTE: Only DS3 interfaces supports subrate and scrambling. • Digital Link/Quick Eagle • Kentrox • Larscom • ADTRAN • Verilink (subrate: only port A mode) NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQ interface.
T4000 Core Router Interface Module Reference LEDs Alarms, errors, and events One tricolor per port: • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • Alarm reporting for error statistics and failure counts • DS1 alarms: • • • Instrumentation (counters) 24 • • Alarm indication signal (AIS) • Loss of frame (LOF) • Remote alarm indication signal (RAIS) DS1 error
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router) Related Documentation • T4000 PIC Description on page 3 • T4000 PICs Supported on page 4 Copyright © 2013, Juniper Networks, Inc.
T4000 Core Router Interface Module Reference g004432 Channelized E1/T1 Enhanced IQ (IQE) PIC (T4000 Router) Software release • Junos OS Release12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
Channelized E1/T1 Enhanced IQ (IQE) PIC (T4000 Router) • • Unframed in-band loopback at CSU • Unframed in-band loopback at Smartjack (ANSI) You can configure the following framing modes using the CLI: • T1—SF (D4/superframe), ESF (extended superframe) • E1—G704, G704–no-crc4, unframed • Packet buffering, Layer 2 parsing • Local line, remote line, and remote payload loopback testing; each channel can be looped individually and independently of other channels (DS1/E1 channels) • Simple Network
T4000 Core Router Interface Module Reference LEDs Alarms, errors, and events One tricolor per port: • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • DS1 alarms: • Instrumentation (counters) Related Documentation 28 • Alarm indication signal (AIS) • Loss of frame (LOF) • Remote alarm indication signal (RAIS) • 24-hour alarm reporting history maintained for error
Channelized OC3 IQ PIC (T4000 Router) Channelized OC3 IQ PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features • One OC3 port • Power requirement: 0.39 A @ 48 V (18.
T4000 Core Router Interface Module Reference Software features Cables and connectors LEDs Alarms, errors, and events Related Documentation 30 • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB • Dynamic, arbitrary channel configuration • Full bit error rate test (BERT) • Encapsulations: • Circuit cross-connect (CCC) • Translational cro
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
T4000 Core Router Interface Module Reference • • Digital Link/Quick Eagle • Kentrox • Larscom • ADTRAN • Verilink • Packet buffering, Layer 2 parsing • M13/C-bit parity encoding • DS3 far-end alarm and control (FEAC) channel support • Local line, remote line, and remote payload loopback testing • Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB • Full bit error rate test (BERT) • Encapsulations: • Cables and connectors Subrate and scrambling: • Circuit cross-
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T4000 Router) LEDs Alarms, errors, and events One tricolor Status LED per port: • Off—Not enabled. • Green—Online with no alarms or failures. • Yellow—Online with alarms for remote failures. • Red—Active with a local alarm; router has detected a failure.
T4000 Core Router Interface Module Reference • • • • 34 • Phase lock loop (PLL) • Remote error indication (REI) • Severely errored frame (SEF) • Tributary unit—alarm indication signal (TU-AIS) • Tributary unit—loss of clock (TU-LOC) • Tributary unit—loss of pointer (TU-LOP) • Tributary unit—mismatch (TU-MIS) • Tributary unit—remote defect indication (TU-RD1) • Tributary unit—unequipped (TU-UNEQ) DS1 alarms: • Alarm indication signal (AIS) • Loss of frame (LOF) • Remote alarm ind
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Related Documentation • T4000 PIC Description on page 3 • T4000 PICs Supported on page 4 Copyright © 2013, Juniper Networks, Inc.
T4000 Core Router Interface Module Reference Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router) Figure 3: 4-Port IQE PIC (Type 2) g004426 Figure 2: 1-Port IQE PIC g002706 Figure 4: 4-Port IQE PIC (Type 3) Software release • Junos OS Release 12.1R2 (Type 1) • Junos OS Release 12.2R2 (Type 2) • Junos OS Release 13.2 (Type 3) For information on which FPCs support these PICs, see“T4000 PIC/FPC Compatibility” on page 10.
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router) • Hardware features Software features • 4 OC12 channel • 16 OC3 channels • 48 DS3 channels • 672 DS1 channels • 974 DS0 channels SDH channelization (4-port PIC): • 4 STM4 channel • 16 STM1 channels • 48 E3 channels • 504 E1 channels • 48 DS3 channels • 672 DS1 channels • 974 DS0 channels • Power requirement: 1.
T4000 Core Router Interface Module Reference • Cables and connectors • Frame Relay for TCC • Frame Relay port CCC • High-Level Data Link Control (HDLC) • HDLC framing for CCC • HDLC framing for TCC • MPLS CCC • MPLS TCC • Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) • Point-to-Point Protocol (PPP) • PPP for CCC • PPP for TCC Encapsulations available only for DS1: • Multilink Frame Relay end-to-end (MLFR FRF.
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T4000 Router) • • • • • Virtual container—remote defect indication (VRD1) • Virtual container—unequipped (VUNEQ) SDH alarms: • Administrative unit alarm indication signal (AU-AIS) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Higher order path—alarm indication signal (HP-AIS) • Higher order path—far-end receive failure (HP-FERF) • Higher order path
T4000 Core Router Interface Module Reference • Instrumentation (counters) Related Documentation 40 DS3 error detection: • C-bit code violations (CCV) • C-bit errored seconds (CES) • C-bit severely errored framing seconds (CEFS) • CRC errors • Excessive zeros (EXZ) • Far-end block error (FEBE) • Far-end receive failure (FERF) • Line errored seconds (LES) • Parity bit (P-bit) code violations (PCV) • Parity bit (P-bit) errored seconds (PES) • Parity bit (P-bit) severely errored framin
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Software release • Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
T4000 Core Router Interface Module Reference Software features • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service Library for Routing Devices for more information about class of service features.
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) LEDs Alarms, errors, and events One tricolor per port: • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • SONET alarms: • • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Loss of frame (
T4000 Core Router Interface Module Reference • • • • Instrumentation (counters) 44 • • Tributary unit—loss of pointer (TU-LOP) • Tributary unit—mismatch (TU-MIS) • Tributary unit—remote defect indication (TU-RD1) • Tributary unit—unequipped (TU-UNEQ) DS1 alarms: • Alarm indication signal (AIS) • Loss of frame (LOF) • Remote alarm indication signal (RAIS) DS1 error detection: • Bursty errored seconds (BES) • CRC errors • Errored seconds (ES) • Line errored seconds (LES) • Loss
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Table 16: PICs Supported in Fourth Slot of T640-FPC2-E and T640-FPC2-E2 with Type 2 IQE PICs PIC Name PIC Model Number Gigabit Ethernet, 2-port SFP PB-2GE-SFP Gigabit Ethernet, 4-port SFP PB-4GE-SFP Gigabit Ethernet IQ, 2-port SFP PB-2GE-SFP-QPP SONET/SDH OC12c/STM4, 4-port with multimode transceivers installed PB-4OC12-SON-MM SONET/SDH OC12c/STM4, 4-port with single-mode intermediate reach transceivers installed PB-4OC12-SON-S
T4000 Core Router Interface Module Reference Channelized STM1 IQ PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features Cables and connectors • One STM1 port • Power requirement: 0.39 A @ 48 V (18.
Channelized STM1 IQ PIC (T4000 Router) LEDs Alarms, errors, and events One tricolor per port: • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) • Lo
T4000 Core Router Interface Module Reference g002618 DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 48 • Four DS3 or E3 ports • DS3 or E3 is configurable on a per-port granularity • Power requirement: 0.51 A @ 48 V (24.
DS3/E3 Enhanced IQ (IQE) PIC (T4000 Router) Software features • Maximum transmission units (MTUs) of up to 9192 bytes • Subrate and scrambling: NOTE: Only DS3 interfaces support subrate and scrambling. • Digital Link/Quick Eagle • Kentrox • Larscom • ADTRAN • Verilink (subrate: only port A mode) NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQ interface.
T4000 Core Router Interface Module Reference LEDs Alarms, errors, and events One tricolor per port: • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • DS3 alarms: • Instrumentation (counters) Related Documentation 50 • Alarm indication signal (AIS) • Loss of frame (LOF) • Loss of signal (LOS) • Phase lock loop (PLL) DS3 error detection: • C-bit code violations (
Fast Ethernet PIC (T4000 Router) Fast Ethernet PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features Cables and connectors • 4 100Base-TX ports • Power requirement: 0.14 A @ 48 V (6.
T4000 Core Router Interface Module Reference LEDs Status LED, one bicolor: • Off—PIC ports not enabled. • Green—PIC is operating normally. • Red—PIC has an error or failure. 4-port PIC—One pair of port LEDs: Related Documentation 52 • Link LED—If green, the port is online; if there is no light, the port is down. • RX LED—If flashing green, the port is receiving data; if there is no light, the port might be on but is not receiving data.
Gigabit Ethernet PICs with SFP (T4000 Router) Gigabit Ethernet PICs with SFP (T4000 Router) Figure 5: 1-Port Gigabit Ethernet PIC Figure 6: 2-Port Gigabit Ethernet PIC Figure 7: 4-Port Gigabit Ethernet PIC Figure 8: 10-Port Gigabit Ethernet PIC Copyright © 2013, Juniper Networks, Inc.
T4000 Core Router Interface Module Reference Software release • 1-port: Junos OS Release 12.1R2 and later (Type 1) • 2-port: Junos OS Release 8.5 and later (Type 2) • 4-port: Junos OS Release 8.5 and later (Type 2) • 10-port: Junos OS Release 8.5 and later (Type 3) For information on which FPCs support this PIC, see T1600 PIC/FPC Compatibility. Description Hardware features Software features • One, two, four, or ten Gigabit Ethernet ports • Power requirement: • 1-port: 0.25 A @ 48 V (11.
Gigabit Ethernet PICs with SFP (T4000 Router) Cables and connectors • You can install any transceiver supported by the PIC.
T4000 Core Router Interface Module Reference Gigabit Ethernet PICs with SFP (T4000 Router) Figure 9: 2-Port Gigabit Ethernet PIC Figure 10: 4-Port Gigabit Ethernet PIC Figure 11: 10-Port Gigabit Ethernet PIC Software release • 2-port: Junos OS Release 12.2R2 and later (Type 2) • 4-port: Junos OS Release 12.2R2 and later (Type 2) • 10-port: Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
Gigabit Ethernet PICs with SFP (T4000 Router) Hardware features Software features • Ten Gigabit Ethernet ports • Power requirement: 0.62 A @ 48 V (29.
T4000 Core Router Interface Module Reference LEDs Status LED, one bicolor: • Off—PIC is not enabled. • Green—PIC is operating normally. • Red—PIC has an error or failure. Port LEDs, labeled 0 through 9, one per port: Related Documentation 58 • Link—If green, the port is online; if there is no light, the port is down. • Activity—If flashing green, the port is receiving data; if there is no light, the port might be on but is not receiving data.
Gigabit Ethernet IQ PIC with SFP (T4000 Router) Gigabit Ethernet IQ PIC with SFP (T4000 Router) Figure 12: 2-Port Gigabit Ethernet IQ PIC Software release • 2-port: Junos OS Release 12.2R2 and later (Type 2): For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features • Two Gigabit Ethernet ports • Power requirement: 0.
T4000 Core Router Interface Module Reference Cables and connectors • You can install any transceiver supported by the PIC.
Gigabit Ethernet IQ2 PICs with SFP (T4000 Router) Gigabit Ethernet IQ2 PICs with SFP (T4000 Router) Figure 13: 4-Port Gigabit Ethernet IQ2 PIC (Type 1) Copyright © 2013, Juniper Networks, Inc.
T4000 Core Router Interface Module Reference g002378 Figure 15: 8-Port Gigabit Ethernet IQ2 PIC (Type 3) Software release • 4-port: Junos OS Release 12.1R2 and later (Type 1) • 8-port: Junos OS Release 12.2R2 and later (Type 2) • 8-port: Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 62 • Eight Gigabit Ethernet ports • Power requirement: 1.
Gigabit Ethernet IQ2 PICs with SFP (T4000 Router) Software features Cables and connectors • Optical diagnostics and related alarms • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Virtual Router Redundancy Protocol (VRRP) support • Hierarchical shaping • Fine-grained queuing and shaping per logical interface at both ingress and egress • 802.
T4000 Core Router Interface Module Reference LEDs OK or Status LED, one tricolor: • Off—PIC is offline and it is safe to remove it from the router. • Green—PIC is operating normally. • Yellow—PIC is initializing. • Red—PIC has an error or failure. APP LED, one bicolor: • Off—Monitoring application is not running. • Green—Monitoring application is running under acceptable load. Port LEDs, labeled 0 through 9, one per port: Related Documentation 64 • Off—Port is not enabled.
Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP (T4000 Router) Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP (T4000 Router) g004422 Figure 16: 8-Port Gigabit Ethernet IQ2E PIC (Type 3) Software release • 8-port: Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description • Eight Gigabit Ethernet ports • Power requirement: • Hardware features 8-port (Type 3): 1.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Optical diagnostics and related alarms • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Drop statistics reported per queue for each of four priority-based drop profiles • Four levels of strict priorities with priority propagation among scheduling levels • Hierarchical shaping and hierarchical scheduler • Virtual Router
Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP (T4000 Router) LEDs OK or Status LED, one tricolor: • Off—PIC is offline and it is safe to remove it from the router. • Green—PIC is operating normally. • Yellow—PIC is initializing. • Red—PIC has an error or failure. APP LED, one bicolor: • Off—Monitoring application is not running. • Green—Monitoring application is running under acceptable load. Port LEDs, labeled 0 through 9, one per port: Related Documentation • Off—Port is not enabled.
T4000 Core Router Interface Module Reference g003926 10-Gigabit Ethernet DWDM OTN EOL PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features Cables and connectors • One 10-Gigabit Optical Transport Network (OTN) port for transport of 10-Gigabit Ethernet (10GBASE-R) traffic • Power requirement: 0.55 A @ 48 V (26.
10-Gigabit Ethernet DWDM OTN EOL PIC (T4000 Router) LEDs Related Documentation Status LED, one bicolor: • Off—PIC is not enabled. • Green—PIC is operating normally. • Red—PIC has an error or is in line-side loopback. • T4000 PIC Description on page 3 • T4000 PICs Supported on page 4 Copyright © 2013, Juniper Networks, Inc.
T4000 Core Router Interface Module Reference 10-Gigabit Ethernet IQ2 PIC with XFP (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 70 • One 10-Gigabit Ethernet port • Power requirements: 1.2 A @48 V (56 W) • Model number: PC-1XGE-TYPE3-XFP-IQ2 • High-performance throughput • WAN-PHY mode at 9.953 Gbps • LAN-PHY mode at 10.
10-Gigabit Ethernet IQ2 PIC with XFP (T4000 Router) Software features Cables and connectors • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Configurable WAN-PHY mode options: • loopback • mpls • path-trace • trigger • Virtual Router Redundancy Protocol (VRRP) support • Hierarchical shaping • Fine-grained queuing and shaping per logical interface at both ingress and egress • 802.
T4000 Core Router Interface Module Reference Related Documentation 72 • T4000 PIC Description on page 3 • T4000 PICs Supported on page 4 Copyright © 2013, Juniper Networks, Inc.
10-Gigabit Ethernet IQ2E PIC with XFP (T4000 Router) g004423 10-Gigabit Ethernet IQ2E PIC with XFP (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features • One 10-Gigabit Ethernet port • Power requirements: 1.2 A @48 V (56 W) • Model number: PC-1XGE-TYPE3-XFP-IQ2E • High-performance throughput • WAN-PHY mode at 9.953 Gbps • LAN-PHY mode at 10.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) • Drop statistics reported per queue for each of four priority-based drop profiles • Four levels of strict priorities with priority propagation among scheduling levels • Hierarchical shaping and hierarchical scheduler • Configurable WAN-PHY mode options: • loopback • mpls •
10-Gigabit Ethernet IQ2E PIC with XFP (T4000 Router) LEDs OK LED, one tricolor: • Off—PIC is offline and safe to remove from the router. • Green—PIC is operating normally. • Yellow—PIC is initializing. • Red—PIC has an error or failure. APP LED, one: • Off—Monitoring application is not running. • Green—Monitoring application is running under acceptable load. • Yellow—Monitoring application is overloaded. LINK STATUS LED, one: Related Documentation • Off—Port is down.
T4000 Core Router Interface Module Reference 10-Gigabit Ethernet PIC with XENPAK (T4000 Router) Software release • Junos OS Release 12.2R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features 76 • One 10-Gigabit Ethernet port • Power requirement: 0.55 A @ 48 V (26.
10-Gigabit Ethernet PIC with XENPAK (T4000 Router) Cables and connectors • Duplex SC connector (RX and TX) • 10-Gigabit Ethernet XENPAK transceivers: • 10GBASE-SR, LAN Rate (model number: XENPAK-1XGE-SR) • 10GBASE-LR, LAN Rate (model number: XENPAK-1XGE-LR) • 10GBASE-ER, LAN Rate (model number: XENPAK-1XGE-ER) • 10GBASE-ZR, LAN Rate (model number: XENPAK-1XGE-ZR) EOL (see PSN-2010-02-649) Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface Specifications LEDs Sta
T4000 Core Router Interface Module Reference g006294 10-Gigabit Ethernet LAN/WAN PIC with SFP+ (T4000 Router) Software release • Junos OS Release 12.1 and later (Type 5) For information on which FPCs support these PICs, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features 78 • Twelve 10-Gigabit Ethernet SFP+ ports • Power requirements: 0.
10-Gigabit Ethernet LAN/WAN PIC with SFP+ (T4000 Router) • • Ethernet translational Ethernet circuit cross-connect (TCC) • Ethernet VPLS • VLAN CCC • Extended VLAN CCC • Extended VLAN TCC • VLAN VPLS Layer 3 protocols: • IPv4 • IPv6 • MPLS • MAC filtering, accounting, policing, and learning for source media access control (MAC) on logical interfaces supported on Junos OS Release 12.1R2 and later. • Flexible encapsulation. • Single, stacked, and flexible VLAN tagging modes.
T4000 Core Router Interface Module Reference Alarms Related Documentation 80 Alarms are vendor-specific. Some transceiver vendors might not support every alarm.
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router) 10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router) Figure 17: 10-Port Type 4 PIC with Oversubscription Figure 18: 24-Port Type 5 PIC with Oversubscription 24 PORT ETHERNET 10GBASE-SFP+ LAN-WAN STATUS ONLINE / OFFLINE 0 1 2 3 4 5 6 7 PRIMARY 8 10 9 11 12 13 14 15 16 17 18 19 20 21 23 g004436 g006295 22 Software release • Junos OS Release 12.
T4000 Core Router Interface Module Reference Type 5 PIC Hardware features • Twenty four 10-Gigabit Ethernet SFP+ ports (only ports 0 through 12 are supported in line-rate mode) • Power requirements: 0.94 A @48 V (45 W) • Model number for 24-Port Type 5 PIC with Oversubscription: PF-24XGE-SFPP Type 4 PIC • High-performance throughput: • WAN-PHY mode at 9.953 Gbps • LAN-PHY mode at 10.
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router) Software features for Type 5 PIC • Two modes of operation: 12 ports in line-rate mode, 24 ports in oversubscribed mode • Intelligent handling of oversubscribed traffic • LAN-PHY mode or WAN-PHY mode selectable per port • IEEE 802.3ad Link Aggregation (on single chassis) NOTE: For PICs that support oversubscription, the PIC must be in line-rate mode to support aggregated Ethernet.
T4000 Core Router Interface Module Reference Cables and connectors You can install any transceiver supported by the PIC. • Duplex LC/PC connector (Rx and Tx) • Fiber-optic 10-Gigabit small form-factor pluggable (SFP+) transceivers. Type 4 PIC: • 10GBASE-ER (model number: SFPP-10GE-ER) • 10GBASE-LR (model number: SFPP-10GE-LR) • 10GBASE-SR (model number: SFPP-10GE-SR) • 10BASE-ZR (model number: SFPP-10GE-ZR) Junos OS Release 12.
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T4000 Router) Alarms Related Documentation Alarms are vendor-specific. Some transceiver vendors might not support every alarm.
T4000 Core Router Interface Module Reference 10-Gigabit Ethernet LAN/WAN PIC with XFP (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 4) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 86 • Four 10-Gigabit Ethernet ports • Power requirements: 0.9 A @48 V (43 W) • Model number: PD-4XGE-XFP • High-performance throughput • WAN-PHY mode at 9.953 Gbps • LAN-PHY mode at 10.
10-Gigabit Ethernet LAN/WAN PIC with XFP (T4000 Router) Software features Cables and connectors • • loopback • mpls • path-trace • trigger • Optical diagnostics, monitoring, and alarms • Flexible Ethernet Services Encapsulation • 802.1q virtual LANs (VLANs) • Ethernet OAM 802.1ag continuity check • Ethernet OAM 802.
T4000 Core Router Interface Module Reference Alarms Related Documentation 88 Alarms are vendor-specific. Some transceiver vendors might not support every alarm.
40-Gigabit Ethernet PIC with CFP (T4000 Router) 40-Gigabit Ethernet PIC with CFP (T4000 Router) 40 G TX RX STATUS g006069 ONLINE/ OFFLINE Software release • Junos OS Release 13.2 For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features • One 40-Gigabit Ethernet port • Power requirement: 1.46 A @ –48 V (70.
T4000 Core Router Interface Module Reference Software features • Media Access Control (MAC) accounting NOTE: MAC accounting on this PIC is not supported when aggregated Ethernet is configured. • Source and destination MAC address filtering • Ethernet OAM 802.
40-Gigabit Ethernet PIC with CFP (T4000 Router) Alarms, errors, and events Related Documentation • Alarm indication signal (AIS) • Laser bias current high/low alarms and warnings • Laser Rx power high/low alarms and warnings • Module not ready alarm • Module power down alarm • Module temperature high/low alarms and warnings • Rx CDR loss of lock alarm • Rx loss of signal alarm • Rx not ready alarm • Tx CDR loss of lock alarm • Tx data not ready alarm • Tx laser fault alarm • Tx n
T4000 Core Router Interface Module Reference 100-Gigabit Ethernet PIC with CFP (T4000 Router) g006291 Figure 19: Type 5 100-Gigabit Ethernet PIC Software release • Junos OS Release 12.1R1 and later (Type 5) • Junos OS Release 12.1R2 and later (Type 4) g006042 100 G PIC 1 100 G PIC 0 Figure 20: Type 4 100-Gigabit Ethernet PICs in a T1600-FPC4-ES FPC NOTE: The Type 4 100-Gigabit Ethernet PIC is available only packaged in an assembly with the T1600-FPC4-ES FPC.
100-Gigabit Ethernet PIC with CFP (T4000 Router) Type 4 PIC • One 100-Gigabit Ethernet port • Power requirements for PD-1CE-CFP-FPC4 (PIC and FPC): 9.48 A @48 V (455 W) • Model number: PD-1CE-CFP-FPC4 • PIC 0 and PIC 1 are connected by a bridge board. • There are two physical interfaces when the 100-Gigabit Ethernet PIC is online. Each physical interface represents one of two internal 50-Gigabit Ethernet Packet Forwarding Engines (PFEs) in the FPC.
T4000 Core Router Interface Module Reference Software features for Type 5 PIC • Interface hold timer • Support for 100 Gigabit Ethernet MIBs • Graceful Routing Engine switchover (GRES) supported on Junos OS Release 12.1.R2 and later.
100-Gigabit Ethernet PIC with CFP (T4000 Router) Software features for Type 4 PIC • Media Access Control (MAC) accounting NOTE: MAC accounting on this PIC is not supported when aggregated Ethernet is configured. • Source and destination MAC address filtering • Ethernet OAM 802.
T4000 Core Router Interface Module Reference Cables and connectors • You can install any 100-Gigabit Ethernet CFP transceiver supported by the PIC. • 100GBASE-LR4 (model number: CFP-100GBASE-LR4) • Duplex SC connector (RX and TX) • • 100GBASE-ER4 (model number: CFP-100GBASE-ER4) • Duplex LC connector (RX and TX) • • LEDs Junos OS Release 12.3 and later 100GBASE-SR10 (model number: CFP-100GBASE-SR10) • 24-fiber MPO • • Junos OS Release 12.1 and later Junos OS Release 12.
100-Gigabit Ethernet PIC with CFP (T4000 Router) Alarms Related Documentation Alarms are vendor-specific. Some transceiver vendors might not support every alarm.
T4000 Core Router Interface Module Reference MultiServices PICs (T4000 Router) Figure 21: MultiServices 400 PIC Figure 22: MultiServices 500 PIC Software release • MultiServices 400: Junos OS Release 12.2 and later (Type 2) • MultiServices 500: Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description 98 • Individual licenses must be purchased for services. • Power requirement: • Multiservices 400: 0.
MultiServices PICs (T4000 Router) Hardware features Software features • Model number for Multiservices 400 PIC: PB-MS-400-2 • Model number for Multiservices 500 PIC: PB-MS-500-3 • Multiservices 400: up to 3.2 million flows • Multiservices 500: up to 3.
T4000 Core Router Interface Module Reference Table 17: MultiServices PICs Software Features Supported on the T4000 Router (continued) Software Feature MultiServices 400 MultiServices 500 Passive flow monitoring 12.2 – Passive flow collection 12.2 – Flow-tap – – Dynamic flow capture 12.2 – Real-time performance monitoring – – Link Services – – Traffic sampling – 12.
SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (T4000 Router) SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (T4000 Router) Figure 23: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1) Figure 24: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 2) PORT 3 Software release • 4-port: Junos OS Release 12.1R2 and later (Type 1) • 4-port: Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Optical diagnostics and related alarms • Per-port SONET/SDH framing • IEEE 802.
SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (T4000 Router) Alarms, errors, and events • • • Related Documentation SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P)
T4000 Core Router Interface Module Reference SONET/SDH OC12c/STM4 EOL PIC (T4000 Router) Figure 25: 4-Port SONET/SDH OC12c/STM4 PIC Software release • Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features 104 • Four ports • Power requirement: 0.23 A @ 48 V (10.
SONET/SDH OC12c/STM4 EOL PIC (T4000 Router) Cables and connectors • Duplex SC connector (Rx and Tx) • SONET/SDH OC12/STM4 fixed transceiver: 4-port: Multimode 4-port: Single-mode Intermediate reach (IR-1) Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device.
T4000 Core Router Interface Module Reference • Alarms, errors, and events • Related Documentation 106 SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate signal degrade (BERR-SD) • Bit error rate signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1 • Bit interleaved parity (BIP) error B2 • Bit interleaved parity (BIP) error B3 • Loss of frame (LOF) • Loss of pointer (LOP-P) • Loss of signal (LOS) • Far-end bit error
SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T4000 Router) SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T4000 Router) Figure 26: 1-Port SONET/SDH OC12/STM4 (Multi-Rate) PIC Software release Figure 27: 4-Port SONET/SDH OC12/STM4 (Multi-Rate) PIC • Junos OS Release 12.1R2 ander later • Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Optical diagnostics and related alarms • Per-port SONET/SDH framing • Link aggregation • Alarm and event counting and detection • Dual-router automatic protection switching (APS) • Multiprotocol Label Switching (MPLS) fast reroute • Encapsulations: • Circuit cross-connect (CCC) • Translational cross-connect (TCC) • Frame Relay • High-Level Data Link Control (HDLC) • Point-to-Point Protocol (PPP)
SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T4000 Router) Alarms, errors, and events • • • Related Documentation SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P
T4000 Core Router Interface Module Reference SONET/SDH OC48c/STM16 EOL PICs (T4000 Router) Figure 28: 1-Port SONET/SDH OC48c/STM16 PIC Software release Figure 29: 4-Port SONET/SDH OC48c/STM16 PIC • 1-port: Junos OS Release 12.2R2 and later (Type 2) • 4-port: Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features 110 • One or four OC48 ports • 1-port: 0.
SONET/SDH OC48c/STM16 EOL PICs (T4000 Router) Cables and connectors • Duplex SC Connector (Rx and Tx) • 1-port and 4-port: SONET/SDH OC48/STM16 fixed transceiver: short reach (SR-1) • 1-port: Long reach (LR-1) • Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device.
T4000 Core Router Interface Module Reference • Alarms, errors, and events • Related Documentation 112 SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate signal degrade (BERR-SD) • Bit error rate signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1 • Bit interleaved parity (BIP) error B2 • Bit interleaved parity (BIP) error B3 • Loss of frame (LOF) • Loss of pointer (LOP-P) • Loss of signal (LOS) • Far-end bit error
SONET/SDH OC48c/STM16 PIC with SFP (T4000 Router) SONET/SDH OC48c/STM16 PIC with SFP (T4000 Router) Software release • Junos OS Release 12.1R2 and later For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features • Four OC48 ports • Power requirement: 0.46 A @ 48 V (22.
T4000 Core Router Interface Module Reference Cables and connectors You can install any transceiver supported by the PIC. For information about installing and removing.
SONET/SDH OC48c/STM16 PIC with SFP (T4000 Router) Alarms, errors, and events • • • Related Documentation SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P), far-end p
T4000 Core Router Interface Module Reference SONET/SDH OC48c/STM16 EOL PIC with SFP (T4000 Router) Software release • Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features 116 • One OC48 port • Power requirement: 0.
SONET/SDH OC48c/STM16 EOL PIC with SFP (T4000 Router) Cables and connectors • Duplex LC Connector (Rx and Tx) • SONET/SDH OC48/STM16 fiber-optic SFP transceivers: • Short reach (SR-1) (model number: SFP-1OC48-SR) • Intermediate reach (IR-1) (model number: SFP-1OC48-IR) • Long reach (LR-1) (model number: SFP-1OC48-LR) Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid
T4000 Core Router Interface Module Reference • Alarms, errors, and events • Related Documentation 118 SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate signal degrade (BERR-SD) • Bit error rate signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1 • Bit interleaved parity (BIP) error B2 • Bit interleaved parity (BIP) error B3 • Loss of frame (LOF) • Loss of pointer (LOP-P) • Loss of signal (LOS) • Far-end bit error
SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) g006030 SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) Software release • Junos OS Release 13.2 and later (Type 3) For information on which FPCs support this PIC, see“T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features • Four OC48/STM16 ports • Clear channel functionality • SONET and SDH is configured on a per-port granularity • Power requirement: 1.
T4000 Core Router Interface Module Reference Cables and connectors • Frame Relay for TCC • Frame Relay port CCC • High-Level Data Link Control (HDLC) • HDLC framing for CCC • HDLC framing for TCC • MPLS CCC • MPLS TCC • Point-to-Point Protocol (PPP) • PPP for CCC • PPP for TCC You can install any transceiver supported by the PIC.
SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T4000 Router) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Remote defect indicator—line (RDI-L) • Remote defect indicator—path (RDI-P) • Remote error indicator (REI) • Unequipped (UNEQ) • Payload label mismatch—path (PLM-P) SDH alarms: • Loss of light (LOL) • Phase lock loop (PLL) • Loss of frame (LOF) • Loss of signal (LOS) • Severely errored frame (SEF) • Multiplex-section alarm indicator s
T4000 Core Router Interface Module Reference SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP (T4000 Router) Software release • Junos OS Release 12.2R2 and later (Type 2) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 122 • Rate-selectable using one of the following rates: • 1-port OC3c/STM1c • 1-port OC12/STM4 • 1-port OC12c/STM4c • 1-port OC48/STM16 • 1-port OC48c/STM16c • Power requirement: 0.20 A @ 48 V (9.
SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP (T4000 Router) Software features Cables and connectors • Optical diagnostics and related alarms • Per-port SONET/SDH framing • IEEE 802.
T4000 Core Router Interface Module Reference Alarms, errors, and events • • • Related Documentation 124 SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P), far-end p
SONET/SDH OC192/STM64 EOL PIC (T4000 Router) SONET/SDH OC192/STM64 EOL PIC (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 3) Description • One OC192 port • Power requirement: 0.45 A @ 48 V (21.6 W) • Model number: PC-1OC192-SON-SR2 • Multiplexing and demultiplexing • Rate policing on input • Rate shaping on output • Packet buffering, Layer 2 parsing • SONET/SDH framing • IEEE 802.
T4000 Core Router Interface Module Reference LEDs STATUS LED, one tricolor: Alarms, errors, and events • Off—Not enabled • Green—Online with no alarms or failures • Yellow—Online with alarms for remote failures • Red—Active with a local alarm; router has detected a failure • SONET alarms: • Related Documentation 126 • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate signal degrade (BERR-SD) • Bit error rate signal fail (BERR-SF) • Bit int
SONET/SDH OC192/STM64 PICs with XFP (T4000 Router) SONET/SDH OC192/STM64 PICs with XFP (T4000 Router) Figure 30: 1-Port SONET/SDH OC192/STM64 PIC Software release Figure 31: 4-Port SONET/SDH OC192/STM64 PIC • 1-port: Junos OS Release 12.1R2 and later (Type 3) • 4-port: Junos OS Release 12.1 and later (Type 4) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
T4000 Core Router Interface Module Reference Software features Cables and connectors • Configuration of SONET or SDH framing on a per-port basis on the 4-port Type 4 PIC . • SONET/SDH framing • IEEE 802.
SONET/SDH OC192/STM64 PICs with XFP (T4000 Router) Alarms, errors, and events • • • Related Documentation SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P), far-end
T4000 Core Router Interface Module Reference SONET/SDH OC768c/STM256 PIC (T4000 Router) Software release • Junos OS Release 12.1 and later (Type 4) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features 130 • One OC768 port • Power requirement: 1.37 A @ 48 V (65.
SONET/SDH OC768c/STM256 PIC (T4000 Router) Software features • SONET/SDH framing • IEEE 802.
T4000 Core Router Interface Module Reference Alarms, errors, and events • • • Related Documentation 132 SONET alarms: • Alarm indication signal—line (AIS-L) • Alarm indication signal—path (AIS-P) • Bit error rate—signal degrade (BERR-SD) • Bit error rate—signal fail (BERR-SF) • Bit interleaved parity (BIP) error B1, B2, B3 • Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE) • Far-end bit error: remote error indication—path (REI-P), far-end p
Tunnel Services PICs (T4000 Router) Tunnel Services PICs (T4000 Router) Software release • Junos OS Release 12.1R2 and later (Type 1) • Junos OS Release 12.2R2 and later (Type 2) • Junos OS Release 12.1R2 and later (Type 3) For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10. Description Hardware features Software features LEDs Related Documentation • Power requirement: 0.07 A @ 48 V (3.
T4000 Core Router Interface Module Reference Junos OS Documentation and Release Notes For a list of related Junos OS documentation, see http://www.juniper.net/techpubs/software/junos/. If the information in the latest release notes differs from the information in the documentation, follow the Junos OS Release Notes. ® To obtain the most current version of all Juniper Networks technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/.
Requesting Technical Support To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/ Opening a Case with JTAC You can open a case with JTAC on the Web or by telephone. • Use the Case Management tool in the CSC at http://www.juniper.net/cm/. • Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
