Spec Sheet

ManualsBrandsJuniper ManualsEthernet SwitchQFX5100 Network Switch

Data SheetQFX5100 Ethernet Switch

• Each QSFP+ port can be configured as a 4 x 10GbE

interface

• Each QSFP+ port can be configured as a 40 Gbps port

• USB port

• Console port

• 2 management ports: 1 RJ-45 and 1 SFP

• Supported transceiver and direct attach cable

• SFP+ 10GbE optical modules

• SFP+ DAC cables: 1/3/5 m twinax copper and 1/3/5/7/10 m

active twinax copper

• SFP GbE optical and copper module

• QSFP+ to SFP+ 10GbE direct attach break-out copper

(1/3 m twinax copper cable)

Rack Installation Kit

• Versatile four post mounting options for 19-in server rack or

datacom rack

Airﬂow

• Front-to-back and back-to-front cooling

• Redundant variable-speed fans to reduce power draw

Power Supply and Fan Modules

• Dual redundant (1+1) and hot-pluggable power supplies

• 110-240 V single phase AC power

• -36 to -72 V DC power

• Redundant (N+1) and hot-pluggable fan modules for front-

to-back and back-to-front airflow

Performance Scale (Unidimensional)

• MAC addresses per system: 288,000

• VLAN IDs: 4,096

• Number of link aggregation groups (LAGs): 128

• Number of ports per LAG: 32

• Number of FCoE VLANs/FC Virtual Fabrics: 4,095

• Firewall filters: 4000

• IPv4 unicast routes: 128,000 prefixes; 208,000 host routes;

ECMP paths

• IPv4 multicast routes: 104,000

• IPv6 multicast routes: 52,000

• IPv6 unicast routes: 64,000 prefixes

• ARP entries: 48,000

• Jumbo frame: 9,216 bytes

• Spanning Tree Protocol (STP)

- Multiple Spanning Tree Protocol (MSTP) instances: 64

- VLAN Spanning Tree Protocol (VSTP) instances: 253

• Traffic mirroring

- Mirroring destination ports per switch: 4

- Maximum number of mirroring sessions: 4

- Mirroring destination VLANs per switch: 4

Layer 2 Features

• STP—IEEE 802.1D (802.1D-2004)

• Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP

(IEEE 802.1s)

• Bridge protocol data unit (BPDU) protect

• Loop protect

• Root protect

• RSTP and VSTP running concurrently

• VLAN—IEEE 802.1Q VLAN trunking

• Routed VLAN Interface (RVI)

• Port-based VLAN

• MAC address filtering

• Private VLAN (PVLAN)

• QinQ

• VLAN Translation

• Static MAC address assignment for interface

• Per VLAN MAC learning (limit)

• MAC learning disable

• Link Aggregation and Link Aggregation Control Protocol

(LACP) (IEEE 802.3ad)

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

Link Aggregation

• Multi-chassis link aggregation (MC-LAG)

• Redundant Trunk Group (RTG)

• LAG load sharing algorithm—bridged or routed (unicast or

multicast) traffic:

- IP: SIP, Dynamic Internet Protocol (DIP), TCP/UDP source

port, TCP/UDP destination port

- Layer 2 and non-IP: MAC SA, MAC DA, Ethertype, VLAN ID,

source port

- FCoE packet: Source ID (SID), Destination ID (DID),

Originator exchange ID (OXID), source port

Layer 3 Features (IPv4)

• Static routing

• Routing policy

• Routing protocols (RIP, OSPF, IS-IS, BGP)

• Virtual Router Redundancy Protocol (VRRP)

• Bidirectional Forwarding Detection (BFD) protocol

• Virtual router

• Dynamic Host Configuration Protocol (DHCP) relay

• Proxy Address Resolution Protocol (ARP)

Multicast Features

• Internet Group Management Protocol (IGMP): v1, v2 , V3

• IGMP snooping: v1, v2, v3

• IGMP Filter

• PIM-SM

• Multicast Source Discovery Protocol (MSDP)

MAC address table uses a hash-based scheme to program entries; therefore, some entries

may not be programmed due to hash index collision.

USR optics and QFSP+ SR4 optics