User guide

CHAPTER 16

HSM Card

•

Resetting the HSM Card In Case Of An Error on page 61

Resetting the HSM Card In Case Of An Error

If the FIPS card LEDs indicates an error or fault, try resetting the HSM card prior to

rebooting your appliance.

To reset the HSM card:

1. Connect to the serial console of the FIPS appliance you want to reset.

2. Enter 9 to select FIPS Option.

3. Enter 5 to select Reset the HSM.

4. Observe the LEDS on the FIPS card. If they do not eventually turn green, reboot your

appliance.

Documentation

• FIPS Overview on page 9