user manual Ceramic glass induction hob JHD80240I
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety Information Description of the appliance Operating the appliance Tips on cooking and frying Cleaning and care 2 3 5 10 11 What to do if… Disposal Installation instructions Service 12 13 13 15 Subject to change without notice Safety Information Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
electrolux 3 Safety when cleaning • For cleaning, the appliance must be switched off and cooled down. • For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted. How to avoid damage to the appliance • The glass ceramic can be damaged by objects falling onto it. • The edge of the glass ceramic can be damaged by being knocked by the cookware.
electrolux Control panel layout 1 3 2 4 11 1 2 3 4 5 6 Key lock with display STOP+GO with indicator Power function Cooking zone indicators -Timer function Timer display Heat setting indicator Touch Control sensor fields The appliance is operated using Touch Control sensor fields.
electrolux 5 Sensor field Function Reduce settings To reduce Timer time Displays Display + number Description Residual heat Cooking zone is still hot Fault Malfunction has occurred Pan detection Cookware is unsuitable or too small or no cookware has been placed on the cooking zone Automatic switch off Switch off is active. Residual heat indicator Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down.
electrolux Control panel To switch off Display Indicator goes out Touch When you switch the appliance off, the locking function is automatically switched off. Switching the STOP+GO function on and off The STOP+GO function simultaneously switches all cooking zones that are switched Control panel To switch on Touch To switch off Touch Display Heat setting that was previously set (not automatic warm up function) STOP+GO does not stop the Timer function.
electrolux 7 Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel 1. Pilot light Switch on appliance. Do not set a heat setting. 2. Touch for 4 seconds lights up. The operational readiness indicators of the individual cooking zones light up. above lights up The child safety device is switched on.
electrolux Power Management The cooking zones of the cooking surface have a maximum power. The maximum power is reached when the heat setting 9 has been set for all cooking zones. Two cooking zones generate a pair (see figure) and therefore, the power management shares the maximum available power between these cooking zones.
electrolux 9 Setting the time Step Control panel Indicator 1 Select cooking zone Pilot light for the cooking zone selected flashes 2 Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel 1 Select 2 Touch Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed cooking zone The time remaining counts backwards to 00.
electrolux Control panel • When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more than 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered. Induction cooking zones • In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automatically switches itself off. is displayed.
electrolux 11 If possible, always place a lid on the cookware. Heat setting Cooking process 0 Examples of cooking applications The information given in the following table is for guidance only. suitable for Cook time Tips/Hints Off position 1 Keeping food warm Keeping cooked foods warm as required Cover 1-2 Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally 1-2 Solidifying Fluffy omelettes, baked eggs 10-40 mins.
electrolux 2. Limescale rings, water rings, fat splashes, shiny metallic discolorations should be removed after the appliance has cooled down using cleaner for glass ceramic or stainless steel.
electrolux 13 Problem Possible cause Remedy switching on again, is displayed again, call the customer service department If you are unable to remedy the problem please contact your dealer or the Cusby following the above suggestions, tomer Care Department. Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
electrolux Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap.
electrolux 15 R10 R5 7 min. 38 min. 5 12 min. 20 min.600 490 514 +1 750 774 +1 min. 38 min. 5 Rating Plate JHD80240I 55GBDC3AU 949 593 101 ELECTROLUX Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
www.electrolux.com www.electrolux.
