User manual

18
PR0
540
50
3
2
1
1. Slide the appliance into the recess, pushing it
against the wall on the handle side.
2. Apply joint the sealing strip as shown in figure.
D132
A
D022
4. Apply covers (B) on joint cover lugs and into hinge
holes.
D013
BB
5. Separate parts A, B, C, D as shown in the figure.
PR266
A
B
C
D
Building-in
Dimensions of the recess
JKI 2038/JKI 4038 JKI 4068
Height of housing (1) 880 1225 mm
Depth of housing (2) 550 550 mm
Width of housing (3) 560 560 mm
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws provided in the kit included with the
appliance. Snap vent grille (C) and hinge cover (D)
into position.
D727
C
D