Geschirrspüler JSV 45601 Bedienungsanleitung
Inhalt Wichtige Hinweise 3 Entsorgung 3 Wirtschaftliches und umweltschonendes Spülen 3 Installationsanweisung Einbau Justierung Befestigung Anschluss des Wasserzulaufschlauches Zulaufschlauch mit Sicherheitsventil Anschluss des Wasserablaufschlauches Elektroanschluss 4 4 4 4 4 4 5 5 Gerätebeschreibung 6 Die Bedienungsblende Akustische Signale 6 7 Vor der ersten Inbetriebnahme Wasserenthärteranlage Einfüllen des regenerierenden Salzes Klarspülmittel 8 8 9 9 Im täglichen Gebrauch Besteck und Ges
Wichtige Hinweise Bewahren Sie diese Bedienungsanleitung sorgfältig zusammen mit dem Gerät auf, damit Sie sie auch in Zukunft zu Rate ziehen können. Sollten Sie das Gerät verkaufen oder Dritten überlassen oder es im Falle eines Umzuges in der alten Wohnung lassen, so sorgen Sie dafür, dass das Gerät komplett mit diesem Heft übergeben wird, damit der neue Besitzer sich über die Arbeitsweise des Gerätes und die diesbezüglichen Hinweise informieren kann.
Installationsanweisung Sie sollten die beim Elektroanschluss des Gerätes anfallenden Arbeiten von einem fachkundigen und zugelassenen Elektriker ausführen lassen. Anschluss des Wasserzulaufschlauches Dieser Geschirrspülautomat kann an Kalt- oder Warmwasser bis 60°C angeschlossen werden. Es ist jedoch empfehlenswert, einen Kaltwasseranschluss zu wählen.
Anschluss des Wasserablaufschlauches Elektroanschluss Der Wasserablaufschlauch kann angeschlossen werden: Die Nennwerte für den Stromanschluss sind auf dem Typenschild an der Tür angegeben. Bevor Sie den Stecker in die Steckdose stecken, Folgendes prüfen: 1. am Syphonverschluss des Spülbeckens, mit einer Schlauchschelle; 2. an einem festen Wandanschluss mit Ablaufbelüftung, und mit einem Innendurchmesser von mindestens 4 cm. 1.
Gerätebeschreibung 1. Geschirrkorbarretierung 2. Härtebereichsschalter 3. Salzbehälter 4. Behälter für Reiniger 5. Bedienblende 6. Typenschild 7. Behälter für Klarspüler 8. Siebe 9. Unterer Sprüharm 10. Oberer Sprüharm 11.
Programmauswahl/-abbruch-Taste (Löschen): Akustische Signale Mit dieser Taste erfolgt die Auswahl eines Spülprogramms. Die Taste drücken, bis die Kontrolllampe für das gewünschte Spülprogramm aufleuchtet (siehe Diagramm “Spülprogramme”). Die Ende-Kontrolllampe blinkt. Wenn das Spülprogramm eingestellt ist, die Tür des Geschirrspülers schließen. Das Programm startet automatisch.
Vor der ersten Inbetriebnahme Vor dem erstmaligen Einschalten des Geschirrspülers Folgendes vornehmen: b) Elektronische Einstellung Der Geschirrspüler wird im Werk auf Stufe 5 eingestellt. 1. Sicherstellen, dass die Strom- und Wasseranschlüsse den Installationsanweisungen entsprechen 1. Bei ausgeschaltetem Geschirrspüler die Ein/Aus-Taste drücken. Die Ende-Kontrolllampe blinkt Einstellungsmodus).
Einfüllen des regenerierenden Salzes Klarspülmittel Verwenden Sie ausschließlich Spezialsalz für Geschirrspülmaschinen. Sonstige Salzarten enthalten Anteile von anderen Stoffen, die auf die Dauer den Wasserenthärter beschädigen können. Das beim Einfüllen verschüttete Salz kann korrosionsfördernd sein. Deshalb sollte Salz erst kurz vor einem Programmstart eingefüllt werden. Dieses Mittel macht das Geschirr glänzend und begünstigt dessen Trocknung.
Im täglichen Gebrauch ● ● ● ● ● Kontrollieren, ob Salz und Klarspüler nachgefüllt werden muss. Besteck und Geschirr im Geschirrspüler einordnen. Reinigungsmittel für Geschirrspüler einfüllen. Für Besteck und Geschirr geeignetes Spülprogramm auswählen. Spülprogramm starten. Besteck und Geschirr einordnen Schwämme, Haushaltstücher und alle Gegenstände, die sich mit Wasser vollsaugen können, dürfen nicht im Geschirrspüler gereinigt werden.
Oberkorb Höhenverstellung des oberen Korbes Im Oberkorb werden Tassen, Gläser, Salatschüsseln, Untertassen, Dessertteller bis zu einem Durchmesser von 24 cm eingeordnet. Wenn üblicherweise große Teller verwendet werden, können sie im unteren Geschirrkorb eingeordnet werden, wobei der obere Geschirrkorb höher gestellt werden muss. Auf und unterhalb der klappbaren Tassenauflagen eingestellte Teile anordnen, damit das Wasser überall gut hinkommt.
Reinigerzugabe Verschiedene Reinigungsmittel Verwenden Sie ausschließlich spülmaschinengeeignete flüssige, pulver- oder tablettenförmige Reinigungsmittel. Durch eine angemessene Verwendung von Spülmitteln wird auch die Umwelt geschont. Reinigertabletten Reiniger einfüllen, bevor das Spülprogramm eingestellt wird. Reinigungstabletten der verschiedenen Hersteller lösen sich mit unterschiedlicher Schnelligkeit auf.
Spülprogramme Programm Verschmutzungsgrad und Geschirrart Programmbeschreibung (3) Verbrauchswerte Programmdauer Stromverbrauch Wasserverbrauch (in Minuten) (in kWh) (in Liter) 70° Intensiv Stark verschmutzt. Geschirr, Besteck und Kochtöpfe Vorspülen warm Hauptspülen 70°C 2 Klarspülgange lau 1 Klarspülgang warm Trocknung 120 - 130 1,7 - 1,9 23 - 25 65° Normal Normal verschmutzt.
Spülprogramm starten Bei dieser völlig ntergrierbaren Maschine befinden sich die Bedienungselemente an der Türoberseite. Zur Programmeinstellung muss die Tür halb geöffnet werden. Löschen eines laufenden Programms Tür des Geschirrspülers öffnen.
Pflege und Reinigung Die Bedienungsblende sollte regelmäßig mit einem weichen, feuchten Tuch gereinigt werden. Es dürfen nur neutrale Reinigungsmittel und keine Scheuermittel oder Lösungsmittel, wie Azeton, Trichloräthylen usw. verwendet werden. 9. Siebkombination einsetzen und durch Schwenken des Griffs im Uhrzeigersinn bis zum Anschlag verriegeln. Darauf achten, dass das Flächensieb nicht über den Spülraumboden heraussteht. Reinigen Sie die Gummidichtungen der Türe und des Spülbzw.
Was tun, wenn... Versuchen Sie mit Hilfe der hier aufgeführten Hinweise kleinere Störungen am Geschirrspüler selbst zu beheben. Bevor Sie daher den Kundendienst rufen, gehen Sie die folgende Liste von möglichen Fehlerquellen durch. ...Fehlermeldungen angezeigt werden Während des Betriebs wird der Geschirrspüler nicht gestartet oder gestoppt, und eine Abfolge von intermittierenden akustischen Signalen ertönt. Tür des Geschirrspülers öffnen.
...das Spülergebnis nicht zufriedenstellend ist Das Geschirr wird nicht sauber ● ● ● ● ● ● ● ● Es wurde nicht das richtige Spülprogramm gewählt. Geschirr war so eingeordnet, dass das Spülwasser nicht alle Teile erreicht hat. Die Geschirrkörbe dürfen nicht überladen sein. Die Sprüharme können sich nicht frei drehen. Siebe im Spülraumboden sind nicht sauber oder falsch eingesetzt. Es wurde kein Reinigungsmittel verwendet oder zu wenig dosiert.
Österreich Unsere Kundendienststellen und Servicepartner Electrolux stellt Ihnen hiermit jene Partner vor, die dafür garantieren, dass wir Ihnen Top-Qualität mit unseren Kundendiensteinrichtungen jetzt und in Zukunft bieten. Unsere Kundendienststellen in den Bundesländern sind spezialisiert auf unsere Marken: AEG-Electrolux, Electrolux, Juno-Electrolux und Zanussi. Zentrale: Kundendienst Wien, Niederösterreich, nördliches Burgenland Electrolux Hausgeräte GmbH 1230 Wien, Herziggasse 9 Tel.
Hinweise für Prüfinstitute Die Prüfung nach EN 60704 muss bei voller Beladung mit dem Testprogramm (siehe Tabelle "Spülprogramme") durchgeführt werden. Die Prüfung nach EN 50242 muss mit vollem Salzbehälters des Wasserenthärters, mit vollem Vorratsbehälter für Klarspüler und mit dem Testprogramm (siehe Tabelle "Spülprogramms") durchgeführt werden.
From the Electrolux Group. The World’s No.1 choice. Die Electrolux-Gruppe ist der weltweit größte Hersteller von gas- und strombetriebenen Geräten für die Küche, zum Reinigen und für Forst und Garten. Jedes Jahr verkauft die Electrolux-Gruppe in über 150 Ländern der Erde über 55 Millionen Produkte (Kühlschränke, Herde, Waschmaschinen, Staubsauger, Motorsägen und Rasenmäher) mit einem Wert von rund 14 Mrd. USD.