Specification Sheet
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
6” ECONOMY
IC HOUSING
GU24 COMPACT FLUORESCENT LAMPS
IC22GU24
G1.2.6
PRODUCT DESCRIPTION
IC Air-Loc
®
Housing rated for use with GU24 base compact fluorescent
lamps • Energy efficient, sealed housing • Can be completely covered
with insulation • Use supplied adjustment slot covers or Air-Loc Gasket
(see accessories), to stop infiltration and exfiltration of air, reducing
heating and cooling costs • Trims shown with Air-Loc symbol
do not require a gasket.
PRODUCT SPECIFICATIONS
Lamp GU24 base compact fluorescent lamp ratings based on trim
selected–see reverse.
Socket GU24 base plastic • Socket attached to fixed bracket mounted
to top of housing for consistent, straight lamp positioning.
Trims Trim selection shown on reverse.
Labels • U.L. listed for through-branch wiring, damp locations
and IP • UL and cUL Listed • Trims 20, 21, 22, 242, 2330 and 6101
are wet location approved for covered ceiling applications.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Real Nail
®
3 Bar Hangers Telescoping, Patented (US Patent D552,969)
Real Nail
®
3 system permits quick placement of housing anywhere within
24” O.C. joists or suspended ceilings • Integral T-bar notch and clip
secures housing in suspended ceiling grid – no accessory clips required
• 24” expansion stop allows quick placement of fixture in standard
grid spacing • Bars scored in two locations for fast, clean breaking,
allowing housing installation in tight applications • Bars captive to
mounting frame • Edge-mounted for extra strength • Captive bugle-
headed ring shank nail for quick one-step installation and easy removal
with claw hammer for fixture relocation • Quick-Loc slot (location
identified on the mounting frame) and oversized locking set screw lock
fixture in position • Bar hanger foot contoured to align to bottom of
construction joist • Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and (1)
3
⁄4”
knockouts, (4) Non-metallic sheathed cable connectors and ground
wire, U.L. and cUL listed for through-branch wiring, maximum 4 No.
12 AWG 90˚ C branch circuit conductors (2 in, 2 out) • Junction box
provided with removable access plates • Knockouts equipped with
pryout slots.
Mounting Frame 22-gauge die-formed galvanized steel mounting
frame • Rough-in section (junction box, mounting frame, housing
and bar hangers) fully assembled for ease of installation • Sight lines
embossed on mounting frame to allow for easy viewing when aligning
fixtures.
Housing IC housing, .032” aluminum sealed for Air-Loc Compliance
• Housing is vertically adjustable to accommodate up to a 1” ceiling
thickness.
DIMENSIONS
7 1/8"
13 1/2"
Will expand
to 25"
(Reduces to 8 1/2"
with breakaway
feature)
7 1/2"
9 1/2"
13 1/8"
6 7/8” CEILING CUTOUT
ACCESSORIES
Catalog No. Description
ALG6 Air-Loc Gasket
To order, specify catalog number.
PRODUCT CODES
Series Input Voltage Lamp Rating Lamp Included
IC22GU24
6” Economy IC Housing 120V 26W Lamp not Included