Operating Guide

REV-8/15
DIMENSIONS
4” LED RETROFIT BAFFLE TRIM
DOWNLIGHT RETROFIT FOR STANDARD 4”
RECESSED HOUSINGS
4RLD
G1.8.9
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT CODES
Catalog Number Description
4RLD-927-6-WWH 4” LED retrofit baffle trim, 2700K
4RLD-930-6-WWH 4” LED retrofit baffle trim, 3000K
PRODUCT DESCRIPTION
Energy efficient LED retrofit module fits into standard 4” IC or
non-IC recessed housings • Replaces 50W incandescent lamp,
producing over 575 lumens • Dimmable with most standard
incandescent dimmers and electronic low voltage dimmers
• LED retrofit module is designed to provide 36,000 hours of life
• 5 year warranty
PRODUCT SPECIFICATIONS
LED Retrofit Downlight Trim Cast aluminum trim with white
baffle and flange. All-in-one design where LED light engine
mounts directly to trim for ease of installation into existing
4” recessed housings with medium base sockets
• Provided with push-in friction springs.
LED Light Engine LEDs mounted directly to aluminum housing
designed to provide superior thermal management and ensure long
life • 2700K or 3000K LED color temperature • 90 CRI minimum
• Accomodates 120 volts AC at 60Hz • Dimmable with most
standard incandescent, magnetic low voltage and electronic low
voltage dimmers • For a list of compatible dimmers,
see JUNORETROBASICS-DIM.
Electrical Connections Trim features quick connect plug installed
as standard for installation into IC1-LEDT24 and IC1R-LEDT24
housings with mating connector • Trim ships with a medium base
socket adapter whip for installation into 4” incandescent housings
with medium base sockets.
Trim Cast aluminum baffle trim with white finish • Diffusing lens
conceals the LEDs from direct view and provides uniform aperture
luminance.
Life Rated for 36,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Qualified • Certified to the high efficacy
requirements of California T24 • UL and cUL classified for use
with most standard UL listed 4” recessed incandescent housings
and Juno IC1-LEDT24 and IC1R-LEDT24; see below for specific
compatibility requirements • Damp location • Suitable for wet
locations (indoor covered ceilings).
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
The LED retrofit baffle trim is provided with push-in friction springs
as standard.
COMPATIBLE HOUSINGS
The 4RLD retrofit baffle trim is compatible with most 4” recessed
housings measuring at least 4” high with an inside diameter between
4” and 4-1/2”.
Compatible housings include, but not limited to:
Juno housings: IC1 and TC1 Series
Juno quick-connect LED housings: IC1-LEDT24 and IC1R-LEDT24
VuLite housings: V4IC and V4TC Series
Halo housings: H99 Series
Thomas housings: PS4 Series
Capri housings: P4 and R4 Series
Lithonia housings: L3 Series
1/4”
2”
5”
PERFORMANCE DATA
27K 3K
Input Voltage 120V 120V
Input Power Typical 11W 11W
Frequency 60Hz 60Hz
EMI/RFI
FCC Title 47, Part 15
Class B (consumer)
FCC Title 47, Part 15
Class B (consumer)
Minimum starting temp -30°C (-22°F) -30°C (-22°F)
CRI 90 min. 90 min.
CCT 2700K 3000K