Specification

Project:
Fixture Type:
Location:
Contact/Phone:
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 2
G3.1.0
4” MINIATURE UNIVERSAL
IC NEW CONSTRUCTION
HOUSING
INCANDESCENT LAMPS
IC1 SERIES
DIMENSIONS
Catalog Number Input Voltage Lamp Rating
IC1
4" Incandescent New Construction IC Housing 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
IC1 G
4" Incandescent New Construction IC Housing with pre-installed Air-Loc gasket 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
IC1 S
4" Incandescent New Construction IC Housing with smaller footprint bar hanger (Real Nail 2) 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
IC1 S G
4" Incandescent New Construction IC Housing with smaller footprint bar hanger (Real Nail 2) and pre-installed Air-Loc gasket 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
IC1 W
4" Incandescent New Construction IC Housing with push-in electrical connectors for fast, secure installation 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
IC1 W G
4" Incandescent New Construction IC Housing with push-in electrical connectors and pre-installed Air-Loc gasket 120V A19/R14/R16/R20/PAR16/PAR20 (See page 2 for max. trim rating)
PRODUCT CODES
13 1/2"
Will expand
to 25"
(Reduces to 8 1/2"
with breakaway
feature)
12 1/4"
6"
6 3/4"
9 1/8"
Real Nail 3
Real Nail 2
(S option)
PRODUCT DESCRIPTION
IC Air-Loc
®
New Construction Housing with all 4” trims complies with IECC,
Washington State and other state Energy Codes • Double wall construction
• Energy efficient, sealed inner housing does not require separate ALG gasket
G option provides pre-installed Air-Loc gasket on mounting frame to seal
between fixture and mounting surface • Air-Loc housing stops infiltration and
exfiltration of air, reducing heating and cooling costs • Can be completely
covered with insulation.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected – see page 2.
Socket Medium base porcelain with nickel-plated copper screw shell.
Trims Trim selection shown on page 2.
Labels UL listed for through-branch wiring, damp locations and IP • Product
thermally protected against improper use of lamps • Union made • UL Listed/
CSA certified • Trim No. 11, 12, 4101, 4102 and 4181 are wet location
approved for covered ceiling applications • Trims 14, 17 are wet location
approved for covered ceiling applications, when used with outdoor
rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Real Nail
®
Bar Hangers Telescoping, Patented (US Patent D552,969)
Real Nail 3 and Real Nail 2 systems permits quick placement of housing
anywhere within 24” O.C. joists or suspended ceilings • Bars scored in
two locations for fast, clean breaking, allowing housing installation in tight
applications • Bars captive to mounting frame • Edge-mounted for extra
strength • Quick-Loc slot (location identified on the mounting frame) and
oversized locking set screw lock fixture in position • May be installed either
perpendicular or parallel to junction box.
Real Nail 3 Bar Hanger Integral T-bar notch and clip secures housing
in suspended ceiling grid – no accessory clips required • 24” expansion
stop allows quick placement of fixture in standard grid spacing • Captive
bugle-headed ring shank nail for quick one-step installation and easy removal
with claw hammer for fixture relocation • Bar hanger foot contoured to align
to bottom of construction joist • Alternate mounting holes included.
Real Nail 2 Bar Hanger (S options) Small bar hanger foot designed to
install directly on strapping construction material • Features Real Nail captive
nail system for quick one-step installation • G2405 accessory clips required
for suspended ceiling installation.
Junction Box Pre-wired junction box provided with (6)
1
⁄2” and (1)
3
⁄4 ”
knockouts, (4) Non-metallic sheathed cable connectors and ground wire,
U.L. listed/CSA certified for through-branch wiring, maximum 8 No. 12 AWG
90˚ C branch circuit conductors (3 in, 3 out) • Junction box provided with
removable access plates • Knockouts equipped with pryout slots • W options
are supplied with push-in electrical connectors for fast installation.
Mounting Frame 22-gauge die-formed galvanized steel mounting frame
• 9
1
⁄8” L x 6
3
⁄4” W, (excluding bar hangers) • Rough-in section (junction
box, mounting frame, housing and bar hangers) fully assembled for ease of
installation • Pre-installed Air-Loc gasket for G options.
Housing Air-Loc IC housing, .032” aluminum • Inner housing is vertically
adjustable to accommodate up to a 1
3
⁄4” ceiling thickness.
4 1/2” CEILING CUTOUT
Catalog Number Description
4TSA
4" Housing Trim Adapter
GU10WHIP
Medium Base to GU10 Adapter
G2405
T-Bar Clips (Set of 4), for S option only
To order, specify catalog number.
Accessories
Housing and trim can be ordered together or separate, but will always ship separately.