Operating Guide

REV-1/12
DIMENSIONS
5” UNIVERSAL
IC HOUSING
INCANDESCENT LAMPS
IC20
G2.1.0
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT CODES
Catalog Number Input Voltage Lamp Rating (max.)
IC20 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See reverse for max. trim rating)
ACCESSORIES
Catalog No. Description
ALG5 Air-Loc Gasket
To order, specify catalog number.
PRODUCT DESCRIPTION
IC Air-Loc
®
Housing • Energy efficient, sealed housing • Can be
completely covered with insulation • When used with Air-Loc
Gasket (see accessories), stops infiltration and exfiltration of air,
reducing heating and cooling costs • Trims shown with Air-Loc
symbol do not require a gasket.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected–see reverse.
Socket Medium base porcelain with nickel-plated copper screw
shell • Drop socket with spring to accommodate certain trim
installation.
Trims Trim selection shown on reverse.
Labels U.L. listed for through-branch wiring, damp locations and
IP • Product thermally protected against improper use of lamps
• Union made • UL Listed/CSA certified • Trims 210N, 211 and
212N are wet location approved for covered ceiling applications
• Trims 215 and 216 are wet location approved for covered
ceiling applications, when used with outdoor rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Real Nail 3 Bar Hangers Telescoping, patent-pending Real Nail 3
system permits quick placement of housing anywhere within 24”
O.C. joists or suspended ceilings • Integral T-bar notch and clip
secures housing in suspended ceiling grid – no accessory clips
required • 24” expansion stop allows quick placement of fixture in
standard grid spacing • Bars scored in two locations for fast,
clean breaking, allowing housing installation in tight applications
• Bars captive to mounting frame • Edge-mounted for extra
strength • Captive bugle-headed ring shank nail for quick one-step
installation and easy removal with claw hammer for fixture
relocation • Quick-Loc slot (location identified on the mounting
frame) and oversized locking set screw lock fixture in position
• Bar hanger foot contoured to align to bottom of construction joist
• Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and
(1)
3
⁄4” knockouts, (4) Non-metallic sheathed cable connectors and
ground wire, U.L. listed/CSA certified for through-branch wiring,
maximum 8 No. 12 AWG 90˚ C branch circuit conductors (4 in,
4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 22-gauge die-formed galvanized steel
mounting frame • Rough-in section (junction box, mounting frame,
housing and bar hangers) fully assembled for ease of installation
• Sight lines embossed on mounting frame to allow for easy
viewing when aligning fixtures.
Housing IC housing, .032” aluminum sealed for Air-Loc
Compliance • Housing is vertically adjustable to accommodate up
to a 1” ceiling thickness.
5 5/8” CEILING CUTOUT