Operating Guide

REV-10/08
DIMENSIONS
6” SHALLOW UNIVERSAL
IC REMODEL HOUSING
INCANDESCENT LAMPS
IC21R
G1.3.1
Project:
Fixture Type:
Location:
Contact/Phone:
5 3/4"
7 5/16"
13 3/4"
PRODUCT CODES
Catalog Number Input Voltage Lamp Rating (max.)
IC21R 120V A19/R20/PAR20/BR30/PAR30/PAR30L (See reverse for max. trim rating)
ACCESSORIES
Catalog No. Description
ALG6R Air-Loc Gasket
To order, specify catalog number.
PRODUCT DESCRIPTION
IC Air-Loc
®
Remodel Housing • Energy efficient, sealed housing
• IC Remodel Housing for remodel application where back side of
ceiling is not accessible • Installs through an opening in the ceiling
from below • Secured in place by factory installed remodel springs
• Can be completely covered with insulation • When used with
Air-Loc Gasket (see accessories), stops infiltration and exfiltration
of air, reducing heating and cooling costs • Trims shown with
Air-Loc symbol do not require a gasket.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected–see reverse.
Socket Medium base porcelain with nickel-plated copper screw
shell • Floating socket with spring attaches to trim for installation.
Trims Trim selection shown on reverse.
Labels U.L. listed for through branch-wiring, damp locations and
IP • Product thermally protected against improper use of lamps
• Union made • UL Listed/CSA certified • Trim No. 241 is wet
location approved for covered ceiling applications.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Junction Box Pre-wired junction box, UL listed/CSA certified for
through-branch wiring maximum 4 No. 12 AWG 90˚ C branch
circuit conductors (2 in, 2 out) • Junction box provided with
removable access plate, (5)
1
⁄2” knockouts, (4) Non-metallic
sheathed cable connectors and ground wire • Knockouts equipped
with pryout slots.
Housing IC housing, .032” aluminum sealed for Air-Loc
Compliance • Double stack adjustable feature enables remodel
springs to accommodate up to 1
3
⁄4” ceiling thickness.
6 3/4” CEILING CUTOUT