Operating Guide

REV-2/09
DIMENSIONS
SLOPE CEILING IC HOUSING
STANDARD SLOPE:
2/12 to 6/12 PITCH (9˚ to 27˚)
INCANDESCENT LAMPS
IC926
G4.1.0
Project:
Fixture Type:
Location:
Contact/Phone:
16 1/8"
7 5/8"
7 1/32"
x 6 11/16"
Ceiling Cutout
13 1/8"
9 1/8"
13 1/2"
Will expand
to 25"
(Reduces to 9 1/8"
with breakaway
feature)
ACCESSORIES
Catalog No. Description
ALG926 Air-Loc Gasket
To order, specify catalog number.
PRODUCT CODES
Catalog Number Input Voltage Lamp Rating (max.)
IC926 120V A19/MR16/BR30/R30/PAR30/PAR30L/PAR38
PRODUCT DESCRIPTION
Slope ceiling IC Housing “Air-Loc
®
” • Energy efficient, sealed
inner housing • Double wall housing construction • Can be
completely covered with insulation • When used with Air-Loc
Gasket (see accessories), stops infiltration and exfiltration of air,
reducing heating and cooling costs.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected – see reverse.
Socket Medium base porcelain with nickel-plated copper screw
shell • Adjustable to position lamp perpendicular to floor.
Trims Trim selection shown on reverse.
Labels U.L. listed for through-branch wiring, damp locations and
IP • Product thermally protected against improper use of lamps
• Union made • UL Listed/CSA certified • Trim No. 610 is wet
location approved for covered ceiling applications.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Real Nail 3 Bar Hangers Telescoping, patent-pending Real Nail 3
system permits quick placement of housing anywhere within 24”
O.C. joists or suspended ceilings • Integral T-bar notch and clip
secures housing in suspended ceiling grid – no accessory clips
required • 24” expansion stop allows quick placement of fixture
in standard grid spacing • Bars scored in two locations for fast,
clean breaking, allowing housing installation in tight applications
• Bars captive to mounting frame • Edge-mounted for extra
strength • Captive bugle-headed ring shank nail for quick one-step
installation and easy removal with claw hammer for fixture
relocation • Quick-Loc slot and oversized locking set screw lock
fixture in position • Bar hanger foot contoured to align to bottom
of construction joist • Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and
(1)
3
⁄4” knockouts, (4) Non-metallic sheathed cable connectors and
ground wire, U.L. listed/CSA certified for through-branch wiring,
maximum 8 No. 12 AWG 90˚ C branch circuit conductors (4 in,
4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 22-gauge die-formed galvanized steel
mounting frame • Rough-in section (junction box, mounting frame,
housing and bar hangers) fully assembled for ease of installation.
Housing IC housing, .032” aluminum sealed for Air-Loc
Compliance • Access door for junction box accessibility • Inner
housing is vertically adjustable to accommodate up to a 1” ceiling
thickness • Designed to fit into 2 x 8 construction.