User manual

CLOCK FUNCTIONS
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the appliance is on.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
SET+GO To start the appliance with necessary settings with only
one touch of the sensor field any time later.
MINUTE MINDER To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the appliance is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of
the appliance. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not activated if DURA‐
TION and END are set.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and 12:00. "12"
flashes.
1. Touch or to set the hours.
2. Touch or .
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch again
and again until
starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Touch
or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Touch . The DURATION time starts
automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes. and time
setting flash in the display. The appliance
deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.
Setting the END
1. Set an oven function and temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes. and the
11