User manual

57
SERVICE AND SPAREPARTS
ORIGINAL SPARE PARTS
This machine, before leaving the factory, has been
tested and studied by many experts and specialists, in
order to give you the best results.
Any repair work which needs to be carried out should
be done with the utmost care and attention.
For this reason we reccomend that for any problem you
contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem and the particular model which you own.
Original spareparts, certified by the product manufacturer
and carrying this symbol
The gas cocks must be periodically lubricated to
ensure good working and safety.
Maintenance should be performed as follows:
● Remove the knob and panel after having taken out
fastening screws.
● Loosen the two screws located at the sides of the
cock bar.
● Remove the cone and clean it carefully.
● Then, apply a thin layer of grease non soluble in
water, suitable for gas cocks. Take care not to
obstruct the gas flow holes by an excess of grease.
Reassemble the whole with utmost care performing the
operations described above inversely.
are only available at our Service Centre and authorized
spareparts shops.