ES Manual de instrucciones Lavavajillas JGVX60528
CONTENIDO Información sobre seguridad Instrucciones de seguridad Descripción del producto Panel de control Programas Ajustes Opciones 2 3 5 5 6 7 11 Antes del primer uso Uso diario Consejos Mantenimiento y limpieza Solución de problemas Información técnica 11 13 14 16 18 22 Salvo modificaciones. INFORMACIÓN SOBRE SEGURIDAD Antes de instalar y utilizar el aparato, lea atentamente las instrucciones facilitadas.
granjas; áreas de cocina para el personal en tiendas, oficinas y otros entornos de trabajo; – por clientes en hoteles, moteles, pensiones y otros entornos de tipo residencial. No cambie las especificaciones de este aparato. La presión de agua de funcionamiento (mínima y máxima) debe estar entre 0.5 (0.05) / 8 (0.8) bares (MPa) Respete el máximo número de ajustes de lugar de 13.
• El aparato debe conectarse a tierra. • Asegúrese de que los parámetros de la placa de características son compatibles con los valores eléctricos del suministro eléctrico. • Utilice siempre una toma con aislamiento de conexión a tierra correctamente instalada. • No utilice adaptadores de enchufes múltiples ni cables prolongadores. • Asegúrese de no provocar daños en el enchufe ni en el cable de red.
DESCRIPCIÓN DEL PRODUCTO 1 2 3 12 11 1 2 3 4 5 6 7 10 Brazo aspersor del techo Brazo aspersor intermedio Brazo aspersor inferior Filtros Placa de características Depósito de sal Salida de aire 9 8 5 7 6 8 9 10 11 12 Dosificador de abrillantador Dosificador de detergente Cesto para cubiertos Cesto inferior Cesto superior 4 PANEL DE CONTROL 1 1 Botón de encendido/apagado 2 Pantalla 3 Tecla Delay 2 3 4 5 6 7 8 4 Teclas de programa 5 Tecla HygienePlus 6 Tecla XtraDry
7 Tecla Reset 8 Indicadores Indicadores Indicador Descripción Indicador de abrillantador. Siempre está apagado mientras el programa está en funcionamiento. Indicador de sal. Siempre está apagado mientras el programa está en funcio‐ namiento.
Valores de consumo Programa 1) Agua (l) Energía (kWh) Duración (min) P1 10.5 0.932 225 P2 7 - 15 0.6 - 1.7 40 - 170 P3 12.5 - 14.5 1.4 - 1.7 170 - 190 P4 12 - 14 0.7 - 0.9 82 - 92 P5 10 0.9 30 1) La presión y temperatura del agua, las variaciones del suministro de energía, las opciones y la cantidad de platos pueden alterar los valores.
afectar o deteriorar el funcionamiento del aparato. Cómo acceder al modo de usuario Asegúrese de que el aparato se encuentra en modo de selección de programa. Para pasar al modo de usuario, mantenga pulsados simultáneamente y hasta que los indicadores , , , y empiecen a parpadear y la pantalla esté en blanco. Descalcificador de agua El descalcificador elimina minerales del suministro de agua, ya que podrían Cuanto mayor sea el contenido de dichos minerales, más dura será el agua.
• El indicador sigue parpadeando. • La pantalla muestra el ajuste actual: p. ej., = nivel 5. repetidamente para cambiar 2. Pulse el ajuste. 3. Pulse encendido/apagado para confirmar el ajuste. La notificación de abrillantador vacío El abrillantador permite que la vajilla se seque sin rayas ni franjas. Nivel de abrillantador Es posible ajustar la cantidad de abrillantador entre el nivel 1 (cantidad mínima) y el nivel 6 (cantidad máxima).
Cómo activar la señal acústica que indica el final del programa Asegúrese de que el aparato se encuentra en modo de usuario. 1. Pulse . • Los indicadores , , y se apagan. • El indicador sigue parpadeando. • La pantalla muestra el ajuste actual. – = la señal acústica está desactivada. – = la señal acústica está activada. para cambiar el ajuste. 2. Pulse 3. Pulse encendido/apagado para confirmar el ajuste. AirDry AirDry mejora el resultado de secado con menos consumo de energía.
OPCIONES Cada vez que inicie un programa debe activar las opciones que desee. No es posible activar ni desactivar opciones con el programa en marcha. No todas las opciones son compatibles entre sí. Si selecciona opciones no compatibles, el aparato desactiva automáticamente una o más de ellas. Solo permanecen encendidos los indicadores de las opciones aún activas. XtraDry Active esta opción cuando desee aumentar el rendimiento de secado.
El depósito de sal PRECAUCIÓN! Utilice solo sal gruesa diseñada para lavavajillas. La sal fina aumenta el riesgo de corrosión. La sal se utiliza para recargar la resina del descalcificador y asegurar un buen resultado de lavado en el uso diario. Llenado del depósito de sal 1. Gire la tapa del depósito de sal hacia la izquierda y retírela. 2. Vierta 1 litro de agua en el depósito de sal (solo la primera vez). 3. Llene el depósito de sal con 1 kg de sal (hasta que esté lleno).
Si utiliza tabletas múltiples y el rendimiento de secado es satisfactorio, puede desactivar el aviso para rellenar el abrillantador. Recomendamos que siempre utilice abrillantador para mejorar el rendimiento de secado, incluso en combinación con tabletas múltiples que contengan abrillantador. USO DIARIO 1. Abra la llave de paso. 2. Pulse la tecla de encendido/apagado para encender el aparato. Asegúrese de que el aparato se encuentra en modo de selección de programa.
2. Pulse la tecla de encendido/apagado para encender el aparato. Asegúrese de que el aparato se encuentra en modo de selección de programa. 3. Pulse varias veces o hasta que en la pantalla aparezca el número del programa seleccionado. La pantalla muestra el número de programa durante unos 3 segundos; a continuación, se visualiza la duración del programa. 4. Ajuste las opciones aplicables. 5. Cierre la puerta del aparato para iniciar el programa. Inicio de un programa con inicio diferido 1.
• • • • prelavado (en su caso) o seleccione un programa con fase de prelavado. Aproveche siempre todo el espacio de los cestos Al cargar el aparato, asegúrese de que los platos quedan totalmente al alcance de las boquillas del brazo aspersor para lavarse con el agua que expulsan. Asegúrese de que los objetos no se tocan entre sí ni se cubren unos a otros. Puede utilizar detergente para lavavajillas, abrillantador y sal por separado o pastillas múltiples (p. ej. ''3en1'', ''4en1'', ''Todo en 1'').
• Los filtros están limpios y bien instalados. • La tapa del depósito de sal está apretada. • Los brazos aspersores no están obstruidos. • Hay abrillantador y sal para lavavajillas (a menos que utilice pastillas múltiples). • La posición de los objetos en los cestos es correcta. • El programa es adecuado para el tipo de carga y el grado de suciedad. • Se utiliza la cantidad correcta de detergente. Descarga de los cestos 1. Deje enfriar la vajilla y cristalería antes de retirarla del aparato.
PRECAUCIÓN! Una posición incorrecta de los filtros puede dañar el aparato y provocar resultados de lavado no satisfactorios. Limpieza del brazo aspersor superior Recomendamos limpiar periódicamente el brazo aspersor superior que la suciedad no obstruya los orificios. 5. Asegúrese de que no haya restos de comida ni suciedad alrededor del borde del sumidero. 6. Vuelva a colocar el filtro plano (A). Asegúrese de que esté bien colocado bajo las 2 guías. 7. Vuelva a montar los filtros (B) y (C). 8.
la dirección indicada por la flecha a la vez que lo gira hacia la izquierda hasta que encaje. Limpieza del exterior • Limpie el aparato con un paño suave humedecido. • Utilice solo detergentes neutros. • No utilice productos abrasivos, estropajos duros ni disolventes. Limpieza del interior • Limpie cuidadosamente el aparato, incluida la junta de goma de la puerta, con un paño húmedo.
Problema y código de alarma Causa y soluciones posibles El programa no se pone en marcha. • • • El aparato no carga agua. La pantalla muestra o • • . • • • El aparato no desagua. La pantalla muestra . • • • • El dispositivo contra inunda‐ ción se ha puesto en mar‐ cha. Asegúrese de que la puerta del aparato esté cerrada. Si se ha ajustado el inicio diferido, cancele el ajuste o es‐ pere hasta el final de la cuenta atrás.
Problema y código de alarma Causa y soluciones posibles Sonidos de traqueteo o gol‐ peteo dentro del aparato. • El aparato dispara el disyun‐ tor. • La vajilla no está colocada correctamente en los cestos. Consulte el folleto sobre carga del cesto. Asegúrese de que los brazos aspersores pueden rotar li‐ bremente. • No hay amperaje suficiente para todos los aparatos que están en funcionamiento.
Problema Causa y soluciones posibles La vajilla está mojada. • • • • • Para obtener el mejor rendimiento de secado, active la opción XtraDry y ajuste AirDry. El programa no tiene una fase de secado o la tiene con una temperatura baja. El dosificador de abrillantador está vacío. La calidad del abrillantador podría ser la causa. La calidad de las tabletas de detergente podría ser la causa.
Problema Causa y soluciones posibles Vajilla mate, descolorida o agrietada. • • • Asegúrese de lavar en el aparato únicamente objetos aptos para lavavajillas. Cargue y descargue con cuidado el cesto. Consulte el folleto sobre carga del cesto. Coloque los objetos delicados en el cesto superior. Consulte otras posibles causas en "Antes del primer uso", "Uso diario" o "Consejos".
117877950-A-032018