Kühlschrank Refrigerator JKE 4435 Gebrauchsanweisung Operating Instructions
Dear customer, Before placing your new refrigerator into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Disposal of old Appliances . . . . . . . . . . . . . . . . . . . .
1 Safety The safety aspects of our refrigerators comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, we consider it our obligation to make you aware of the following safety information: • Intended use • • • • The refrigerator is intended for use in the home. It is suitable for the cooling, freezing and storing of frozen food, as well as for making ice.
Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger! About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluorocarbon.
Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed.
Installation option 2: Operation of built-in appliances is possible even without a ventilation opening in the furniture plinth. The fresh air able to enter under the appliance is sufficient for ventilation. The function and life of the appliance are not impaired. The warmed air must be able to be exhausted upwards through the air shaft (min. 200 cm2) on the furniture back. If the appliance is ventilated without a plinth opening, however, the energy consumption may differ from that specified in the brochure.
Appliance Description View of Appliance Temperature regulator and interior lighting Butter and cheese compartment with lid Variable door storage compartment Door storage compartment Bottle compartment Prior to Initial Start–Up 1. Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Maintenance”).
Starting up - Setting the temperature The temperature regulator is in the fridge compartment on the upper right. It is also the ON/OFF-switch. how long it is left open – A defect in the appliance. The temperature regulator setting may therefore need to be adjusted to suit the specific conditions. Recommendet settings: 3 Position "0" = Refrigeration off Position "1" = Warmest interior temperature Position "6" = Coldest interior temperature 1. Plug the mains plug into the mains socket. 2.
Interior Accessories Storage Shelves Your appliance is equipped with glass storage shelves. The glass storage shelf above the fruit and vegetable trays must always remain in this position, so that fruits and vegetable remain fresh longer. The remaining storage shelves can be adjusted to various heights: 1. Pull the storage shelf forward until it can be tipped up or down and removed. 2. To insert at a different height use the same procedure in reverse. Adjustment for tall goods: 1.
Correct Storage For physical reasons, there are different temperature regions in the fridge. The coldest region is on the lowest storage shelf. Warmer regions are the top storage shelf, the vegetable basket and the storage compartments on the door. The arrangement example shows at which places in the refrigerator suitable temperatures for various types of foods exist. Tip: Food in the fridge should always be covered or packaged, to prevent drying and tainting of other food.
Defrosting The fridge defrosts automatically The rear wall of the fridge covers with frost when the compressor is running, and defrosts when the compressor is off. The water from the thawing frost is collected in the drain channel on the rear of the fridge, feed through the drain hole into the collector on the compressor, and then evaporated. The condensation water drain hole must be cleaned regularly (see the section "Cleaning and Maintenance".
Cleaning and Maintenance For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. 1 • • • Warning! The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner.
What to do if ... Correcting Malfunctions A malfunction may be caused by only a minor fault that you can rectify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case. Malfunction Appliance does not work. Appliance cools too much. The food is too warm. 1 Warning! Repairs to refrigerators/freezers may only be performed by qualified service engineers.
Changing the light bulb Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data: 220-240 V, max. 15 W, fitting: E 14 1. To switch off the appliance, turn the temperature regulator to position "0". 2. Unplug the mains plug. 3. To change the light bulb, undo the cross head screw and remove the light bulb cover. 4. Change the defective light bulb. 5.
Technical Terminology • • • Refrigerant Liquids that can be used to a generate a cooling effect are known as refrigerants. They have a relatively low boiling-point, indeed so low, that the warmth from the food stored in the fridge or freezer can cause the refrigerant to boil and vaporise. Refrigerant Circuit Closed circulation system that contains the refrigerant. The refrigerant circuit comprises primarily of an evaporator, a compressor, a condenser and pipe work.
Installation Instructions Contents Installation parts supplied . . . . . . . . . . . . . . . Dimensioned drawing . . . . . . . . . . . . . . . . . . Aligning the furniture housing . . . . . . . . . . . . Detaching the appliance door . . . . . . . . . . . . Rehingeing the door (where necessary) . . . . Adjust height . . . . . . . . . . . . . . . . . . . . . . . . . Performing adjustments . . . . . . . . . . . . . . . . Apply joint cover fillets. . . . . . . . . . . . . . . . . .
models with freezer compartment only The following installation steps are illustrated only when the door is hinged on the right (as supplied). If you want the door hinged on the left, please carry out the following installation steps on the opposite side as appropriate.
Attach the grille, push appliance into place Screw appliance into place Install screw-head caps Attach decor panel L Inserting the appliance door L Aligning the appliance door (if necessary) 39
2222744 91 - 1002 Änderungen vorbehalten
