User manual

4. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4 screws
provided in the kit included with the appliance.
Snap vent grille (C) and hinge cover (D) into
position.
D727
C
D
5. Apply covers (B) on joint cover lugs and into hinge
holes.
D013
BB
24
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing mm 880
Depth of housing mm 550
Width of housing mm 560
1. It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
50 mm
min.
200 cm
2
200 cm
2
min.
D526
540
50
560
550
880
PR 32
3. Apply joint the sealing strip as shown in figure.
A
D022
2. Slide the appliance into the recess, pushing it
against the wall on the handle side.
D765