CS Návod k použití Varná deska JKSI808F5
OBSAH Bezpečnostní informace Bezpečnostní pokyny Popis spotřebiče Denní používání Tipy a rady 2 3 6 8 10 Čištění a údržba Odstraňování závad Instalace Technické informace Energetická účinnost 12 12 14 17 17 Zmĕny vyhrazeny. BEZPEČNOSTNÍ INFORMACE Tento návod si pečlivě přečtěte ještě před instalací spotřebiče a jeho prvním použitím. Výrobce nezodpovídá za škody a zranění způsobená nesprávnou instalací či chybným používáním.
Všeobecné bezpečnostní informace • • • • • • • • • • Spotřebič a jeho dostupné části se mohou během používání zahřát na vysokou teplotu. Nedotýkejte se topných článků. Spotřebič nepoužívejte spolu s externím časovačem nebo samostatným dálkovým ovládáním. Příprava jídel s tuky či oleji na varné desce bez dozoru může být nebezpečná a způsobit požár. Oheň se nikdy nesnažte uhasit vodou, ale vypněte spotřebič a poté plameny zakryjte např. víkem nebo hasicí rouškou. Nepokládejte věci na varnou desku.
dnem spotřebiče a horní zásuvkou zajišťuje dostatečnou cirkulaci vzduchu. • Spodek spotřebiče se může silně zahřát. Zajistěte instalaci samostatného nehořlavého panelu, který bude zakrývat spodek spotřebiče. • Ujistěte se, že je mezi pracovní deskou a přední stranou spotřebiče umístěného pod ní prostor pro proudění vzduchu alespoň 2 mm. Záruka nekryje škody způsobené nedostatečným prostorem pro proudění vzduchu.
• Nespoléhejte se na detektor nádoby. • Na varné zóny nepokládejte příbory nebo pokličky. Mohly by se zahřát. • Nepracujte se spotřebičem, když máte vlhké ruce nebo když je v kontaktu s vodou. • Nepoužívejte spotřebič jako pracovní nebo odkládací plochu. • Pokud je povrch spotřebiče prasklý, okamžitě jej odpojte ze sítě. Zabráníte tak úrazu elektrickým proudem. • Když je spotřebič zapnutý, uživatelé s kardiostimulátory se nesmějí přiblížit k indukčním varným zónám blíže než na 30 cm.
POPIS SPOTŘEBIČE Uspořádání varné desky 1 1 Indukční varná zóna 2 Ovládací panel 1 210 mm 300 mm 210 mm 145 mm 1 1 2 Rozvržení ovládacího panelu 1 2 3 4 5 11 6 7 10 9 8 K ovládání spotřebiče používejte senzorová tlačítka. Displeje, ukazatele a zvukové signály signalizují, jaké funkce jsou zapnuté. Sen‐ zor‐ ové tla‐ čítko Funkce Poznámka 1 ZAP/VYP Slouží k zapnutí a vypnutí varné desky.
6 7 Sen‐ zor‐ ové tla‐ čítko Funkce Poznámka - Ukazatele časovače var‐ ných zón Ukazují, pro kterou zónu je nastavený čas. - Displej časovače Ukazuje čas v minutách. - Slouží k volbě varné zóny. - Slouží ke zvýšení nebo snížení času. Funkce posílení výkonu Slouží k zapnutí a vypnutí funkce. Ovládací lišta Slouží k nastavení teploty. 8 / 9 10 11 - Displeje nastavení teploty Displej Popis Varná zóna je vypnutá. Varná zóna je zapnutá. - Je zapnutá funkce STOP+GO.
DENNÍ POUŽÍVÁNÍ UPOZORNĚNÍ! Viz kapitoly o bezpečnosti. Zapnutí a vypnutí Stiskněte ovládací lištu u požadovaného nastavení teploty nebo posuňte prstem po ovládací liště až k požadovanému nastavení teploty. Stisknutím na jednu sekundu varnou desku zapnete nebo vypnete.
varná zóna automaticky přepne na nejvyšší teplotu. Viz část „Technické informace“. Zapnutí funkce pro varnou zónu: stiskněte . Rozsvítí se . Vypnutí funkce: změňte nastavení teploty. Časovač Odpočítávání času Tuto funkci můžete použít k nastavení délky zapnutí varné zóny při jednom vaření. Nejprve zvolte varnou zónu, poté zvolte funkci. Teplotu můžete nastavit před nebo po nastavení funkce. Nastavení varné zóny: stiskněte opakovaně , dokud se nerozsvítí kontrolka požadované varné zóny.
Funkci vypnete takto: pomocí zapněte varnou desku. Nenastavujte teplotu. Na čtyři sekundy stiskněte . varnou desku Rozsvítí se . Pomocí vypněte. Vyřazení funkce na jedno vaření: pomocí zapněte varnou desku. Rozsvítí se . Na čtyři sekundy stiskněte . Do 10 sekund nastavte teplotu. Nyní můžete varnou desku použít. Když varnou desku vypnete pomocí , funkce se opět zapne. • Funkce se zapne, když celkové elektrické zatížení varných zón zapojených do jedné fáze přesáhne 3 700 W.
různých materiálů (sendvičová konstrukce). • hučení: používáte vysoký výkon. • cvakání: dochází ke spínání elektrických přepínačů. • syčení, bzučení: pracuje ventilátor. Tyto zvuky jsou normální a neznamenají žádnou závadu varné desky. není přímo úměrný. Když zvýšíte nastavení teploty, nezvýší se úměrně spotřeba energie dané varné desky. To znamená, že varná zóna se středním nastavením teploty spotřebuje méně než polovinu svého výkonu. Údaje v následující tabulce jsou jen orientační.
Nastavení teploty Vhodné pro: Čas (min) Tipy 9 Vaření vody, vaření těstovin, opražení masa (guláš, dušené maso v hrnci), fritování hranolků. Vaření velkých množství vody. Funkce posílení výkonu je zapnutá. ČIŠTĚNÍ A ÚDRŽBA UPOZORNĚNÍ! Viz kapitoly o bezpečnosti. Všeobecné informace • Varnou desku po každém použití očistěte. • Nádoby používejte vždy s čistou spodní stranou. • Škrábance nebo tmavé skvrny na povrchu nemají vliv na funkci varné desky.
Problém Možná příčina Řešení Zapněte varnou desku zno‐ vu a maximálně do 10 se‐ kund nastavte teplotu. Stiskli jste dvě nebo více senzorových tlačítek sou‐ časně. Stiskněte pouze jedno sen‐ zorové tlačítko. Je zapnutá funkce STOP +GO. Viz část „Denní používání“. Na ovládacím panelu je vo‐ da nebo skvrny od tuku. Vyčistěte ovládací panel. Ozve se zvukový signál a varná deska se vypne. Když je varná deska vypnu‐ tá, ozve se zvukový signál. Zakryli jste jedno nebo více senzorových tlačítek.
Problém Zobrazí se a číslo. Možná příčina Řešení Průměr dna nádoby je pro varnou zónu příliš malý. Použijte varné nádoby se správnými rozměry. Viz část „Technické infor‐ mace“. Porucha varné desky. Varnou desku na chvíli od‐ pojte z elektrické sítě. Vy‐ pojte pojistku v domácí elek‐ troinstalaci. Opět ji připojte. Jestliže se opět rozsvítí, obraťte se na autorizované servisní středisko. Rozsvítí se . U varné desky došlo k chybě, protože se vyvařila voda z nádoby.
Připojovací kabel • Varná deska se dodává s připojovacím kabelem. • Poškozený síťový kabel vyměňte za síťový kabel tohoto typu (nebo vyšší): H05BB-F Tmax 90°C. Obraťte se na místní servisní středisko. Montáž min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm B < 20 mm B 57 mm 41 mm 31 mm B > 20 mm min. 500 mm A 12 mm 28 mm 38 mm A min 30 mm min.
min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min. 2 mm Ochranná skříň Pokud použijete ochrannou skříň (dodatečné příslušenství), není nutné zachovat přední prostor o šířce 2 mm pro proudění vzduchu a instalovat ochranné dno přímo pod varnou deskou. Ochranná skříň nemusí být v některých zemích v nabídce. Obraťte se na svého místního dodavatele. Ochrannou skříň nelze použít, pokud varnou desku instalujete nad troubou.
TECHNICKÉ INFORMACE Typový štítek Model JKSI808F5 Typ 58 GBD CB AU Indukce 7.4 kW Sér. č. ................. JUNO PNC 949 594 393 00 220 - 240 V 50 - 60 Hz Vyrobeno v Německu 7.
Spotřeba energie varných zón (EC electric cooking) Levá přední Levá zadní Uprostřed vpředu Pravá zadní Spotřeba energie varné desky (EC electric hob) 183,6 Wh / kg 172,7 Wh / kg 184,1 Wh / kg 171,6 Wh / kg 178,0 Wh / kg EN 60350-2 - Elektrické spotřebiče na vaření pro domácnost - část 2: varné desky - metody pro měření výkonu • Na varné zóny postavte menší nádoby. • Postavte nádobu přímo na střed varné zóny. • Při ohřevu vody používejte pouze takové množství, které potřebujete.
867312550-A-472014