Dimensions Guide

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2019 Acuity Brands Lighting, Inc. Rev. 04/24/19
1 of 2
Project:
Fixture Type:
Location:
Contact/Phone:
4” LED RETROFIT SMOOTH TRIM
DOWNLIGHT RETROFIT FOR STANDARD
4” RECESSED HOUSINGS
JRD4RD06LM_K90W4
JRD4RD
PRODUCT DESCRIPTION
Energy efficient LED retrofit module fits into standard 4” IC or non-IC
recessed housings • Replaces 50W incandescent lamp, producing over 650
lumens • Dimmable with most standard incandescent, magnetic low voltage
and electronic low voltage dimmers • LED retrofit module is designed to
provide 36,000 hours of life • 5 year warranty
PRODUCT SPECIFICATIONS
LED Downlight Retrofit Trim Aluminum trim with white smooth and flange
• All-in-one design where LED light engine mounts directly to trim for ease of
installation into existing 4” recessed housings with medium base sockets
• Provided with torsion springs.
LED Light Engine LEDs are mounted directly to aluminum housing providing
superior thermal management to ensure long life • 3000K, 3500K, or 4000K
LED color temperatures • 90 CRI minimum • Accommodates 120 volts AC at
60Hz • Dimmable with most standard incandescent, magnetic low voltage
and electronic low voltage dimmers • For a list of compatible dimmers, see
packaging.
Electrical Connections Trim features quick connect plug installed as
standard for installation into IC1 LEDT24 and IC1R LEDT24 housings with
mating connector • Trim ships with a medium base socket adapter whip for
installation into 4” incandescent housings with medium base sockets.
Trim Aluminum smooth trim with white finish • Diffusing lens conceals the
LEDs from direct view and provides uniform aperture luminance.
Life Rated for 36,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Certified • Certified to the high efficacy
requirements of California T24 • ETL classified for use with most standard
UL listed 4” recessed incandescent housings and Juno IC1 LEDT24 and
IC1R LEDT24; see below for specific compatibility requirements • Damp
location • Suitable for wet locations (indoor covered ceilings).
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
The LED retrofit smooth trim is provided with torsion springs as standard.
Accessory kit available for use in housings that do not have torsion spring
retaining brackets.
COMPATIBLE HOUSINGS
The JRD retrofit module is compatible with most 4” recessed housings measuring
at least 4” high with an inside diameter between 4” and 4-1/2”. Removal of the
housing socket plate or socket mounting bracket may be required in order for the
trim to fit properly.
Compatible housings include, but not limited to:
Juno housings: IC1 and TC1 Series
Juno quick-connect LED housings: IC1 LEDT24 and IC1R LEDT24
VuLite
®
housings: V4IC and V4TC Series
Lithonia
®
housings: L3 Series
Halo
®
housings: H99 Series
Thomas
®
housings: PS4 Series
Capri
®
housings: P4 and R4 Series
DIMENSIONS
5” (12.7)
3-3/8” (8.49)
4-1/2” (11.28)
JRD4
PERFORMANCE DATA
30K 35K 40K
Input Voltage 120V 120V 120V
Input Power Typical 10.5W 10.3W 10.5W
Frequency 60Hz 60Hz 60Hz
EMI/RFI
FCC Title 47, Part 15
Class B (consumer)
FCC Title 47, Part 15
Class B (consumer)
FCC Title 47, Part 15
Class B (consumer)
Minimum starting temp -20°C (-68°F) -20°C (-68°F) -20°C (-68°F)
CRI 90 min. 90 min. 90 min.
CCT 3000K 3500K 4000K
ACCESSORIES
LEDRETROWHIP
Replacement E26 screw base adapter for installation into
incandescent housings.
ORDERING INFORMATION
Ordering Example: JRD4RD06LM30K90W4
Series
JRD4RD06LM30K90W4 4” LED Round Retrofit, 650 Lumens, 3000K, 90 CRI, White
JRD4RD06LM35K90W4 4” LED Round Retrofit, 650 Lumens, 3500K, 90 CRI, White
JRD4RD06LM40K90W4 4” LED Round Retrofit, 650 Lumens, 4000K, 90 CRI, White