Specifications

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
5” IC 600 LUMEN
LED DOWNLIGHT
NEW CONSTRUCTION
IC20LED (G4 06LM), RECESSED HOUSING
OPEN TRIMS
G1.4.40
DIMENSIONS
5 5/8” CEILING CUTOUT
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc
®
sealed new construction housing with integral light
engine • Shallow housing allows for fit in 2 x 6 construction • Can be
completely covered with insulation • Fully sealed housing stops infiltration
and exfiltration of air, reducing heating and air cooling costs without the use
of additional gaskets • LED housing is designed to provide 50,000 hours
of life and is compatible with many standard Juno trims • 5 year limited
warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
• No harmful ultraviolet or infrared wavelengths
• No lead or mercury
• Comparable light output to 65W BR30 incandescent
PRODUCT SPECIFICATIONS
LED Light Engine LED array integrated to thermally conductive housing
provides uninterrupted heat transfer to ensure long life of the LED
• Replaceable light engine mounts directly to housing and incorporates the
latest generation, high lumen output LED array • LEDs are binned within a
3-step MacAdam Ellipse exceeding ENERGY STAR
®
requirements for superior
fixture to fixture color uniformity • 2700K, 3000K, 3500K, or 4000K color
temperatures available • 90 CRI minimum.
Optical System Computer-optimized reflector design with high reflectance
white finish coupled with a high transmission diffusing lens conceals the
LEDs and produces uniform aperture luminance • Deep regression of lens
produces a low glare, efficient system that can produce over 600 lumens with
select trims (see page 2 for details) using less than 9W* • Wide flood (>70°)
distribution shipped as standard with optional optic accessories available
and sold separately.
Aesthetic Trim Selections Compatible with wide selection of existing Juno
trims • Shadow free, knife edge design blends seamlessly into ceiling.
LED Driver Choice of dedicated 120 volt (120) driver or universal voltage
(MVOLT) driver that accommodates input voltages from 120-277 volts AC
at 50/60Hz • Power factor > 0.9 at 120V input • 120 volt only driver is
dimmable with the use of most incandescent, magnetic low voltage and
electronic low voltage wall box dimmers • Universal voltage driver is dimmable
with the use of most 0-10V wall box dimmers • For a list of compatible dimmers,
see JUNOICLED-DIM • Mounted between the j-box and housing for easy access
and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Certified when used with select baffle and cone trims
• Certified to the high efficacy requirements of California T24 JA8-2016 with
select trims • UL listed for U.S and Canada through-branch wiring, damp
locations • Union made • UL and cUL.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction
• Aluminum housing sealed for Air-Loc
®
compliance • Housing is vertically
adjustable to accommodate up to a 2” ceiling thickness.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and (1)
3
⁄4”
knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire
• UL listed and cUL listed for through-branch wiring, maximum 8 #12 branch
circuit conductors • Junction box provided with removable access plates
• Knockouts equipped with pryout slots • Quick connect electrical connectors
supplied as standard for fast, secure installation.
Mounting Frame 22-gauge die-formed galvanized steel mounting frame
• Rough-in section (junction box, mounting frame, housing and bar hangers)
fully assembled for ease of installation.
Real Nail 3 Bar Hangers Telescoping Real Nail
®
3 system permits quick
placement of housing anywhere within 24” O.C. joists or suspended
ceilings • Includes removable nail for repositioning of fixture in wood joist
construction • Integral T-bar notch and clip for suspended ceilings
• Design covered under US Patent D552,969.
4 7/8"
13 1/2"
Will expand
to 25"
(Reduces to
9 1/8" with
breakaway feature)
15 3/4"
12 1/2"
9 1/8"
ELECTRICAL DATA
Universal Voltage
120V 277V
Input Power 8.7W (+/-5%) 8.9W (+/-5%)
Input Current 0.07A 0.04A
Frequency 50/60Hz 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15, FCC Title 47 CFR, Part 15,
Class A (commercial) Class A (commercial)
Minimum starting temp -40°C -40°C
ELECTRICAL DATA
Dedicated 120V Only Driver Option
120V
Input Power 8.6W (+/-5%)
Input Current 0.07A
Frequency 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15,
Class B (residential)
Minimum starting temp -25°C
* Nominal input wattage @ 120-volt operation with dedicated 120-volt driver under stable operating conditions.