Operating Guide
REV-10/13
DIMENSIONS
G5.7.5
Project:
Fixture Type:
Location:
Contact/Phone:
2” CUTOUT
PRODUCT DESCRIPTION
The MD1LW mini LED recessed downlight is for use in wet locations
and is IC rated for insulated or non-insulated applications • Sleek,
compact form factor provides direct accent lighting with low glare
optic system that approximates the light output and distribution of
20W halogen lamps • Ideal for both residential and commercial
wet location applications including bathrooms and eave lighting
• Remote mount Class 2 120V to 12V AC electronic or magnetic
transformer required • Designed to provide 50,000 hours
of life • 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
• No harmful ultraviolet or infrared wavelengths
• No lead or mercury
• Comparable light output to 20W MR11
halogen lamps while consuming 5W
PRODUCT SPECIFICATIONS
LED Light Engine High performance, low power LEDs provide
outstanding reliability, performance and color quality/consistency
• 2700K, 3000K, 3500K or 4100K color temperatures available
• 80 CRI minimum.
Optical System Fixtures are offered with a choice of spot, narrow flood
or flood beam patterns • LED source concealed with lensed optic is
deeply regressed into an internal reflector to produce a low glare system
• Reflectors finished to match trim ring color for uniform appearance
• Field replacement of optical lenses is NOT recommended.
Transformer Requires remote mount Class 2, 120V to 12V AC
electronic or magnetic transformer for operation • Juno TL602E
electronic transformer and TL576 magnetic transformer are designed
specifically for use with these fixtures.
Dimming May be dimmed with dimmers tested and qualified by
Juno for use with TL602E and TL576– see transformer specifications
for compatible dimmers • Color temperature remains constant over
dimming range • Consult factory for additional information.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels UL Listed for wet locations and daisy chaining • Union made
• UL and cUL listed • RoHS compliant.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction
• Die cast aluminum housing • Finished with either corrosion resistant
painted finishes or E-coat for decorative plated finishes.
Wiring Compartment Provided with removable access plate • Four
pole terminal block allows for quick, secure connection • UL /cUL listed
for daisy chaining • Easy to wire with commonly available low voltage
cable (Type CL2 or NEC equivalent, 18-12 AWG). Consult local codes
for compliant wiring methods.
Mounting Zinc plated torsion clips are provided fully assembled
to housing • Springs allow for fast, secure installation or removal
in mounting surfaces from 1/8” to 1” thick material • 2” Cutout
dimension corresponds to common hole saw size.
MINI LED DOWNLIGHT
OUTDOOR/WET LOCATION
MD1LWG2 RECESSED HOUSING AND TRIM
LOW VOLTAGE
2 1/4"
1/8"
2 7/8"
5"–6" DEPENDING ON CEILING THICKNESS
ELECTRICAL DATA
Input Voltage 12VAC
Input Power 4.8W
Input Current 0.42A
Frequency Varies with Transformer
ORDERING INFORMATION:
Example: MD1LWG2-27K-FL-WH
Catalog No. Color Temp. Optic Finish
MD1LWG2 27K 2700K SP Spot WH White
3K 3000K NFL Narrow Flood BL Black
35K 3500K FL Flood SN Satin Nickel
41K 4100K BZ Bronze
- -
-
Fixture
Catalog Number Finish Description
TL602E-10-WH White
10W 12V AC Electronic Driver/Transformer
TL602E-25-WH White
25W 12V AC Electronic Driver/Transformer
TL602E-60-WH White
60W 12V AC Electronic Driver/Transformer
TL576-10-BL Black
10W 12V AC Magnetic Driver/Transformer
TL576-25-BL Black
25W 12V AC Magnetic Driver/Transformer
TL576-60-BL Black
60W 12V AC Magnetic Driver/Transformer
Transformer