Dimensions Guide

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-trac
Printed in U.S.A. ©2017-2019 Acuity Brands Lighting, Inc. Rev. 7/22/19
1 of 6
Project:
Fixture Type:
Location:
Contact/Phone:
DIMENSIONS
PRODUCT DESCRIPTION
Reduced-profile, single-circuit trac sections for surface or pendant
mounting. Compatible with a full range of feed, connector and mounting
accessories, as listed on back of this page. Accepts all Trac-Lites and Trac-
Master trac fixtures.
PRODUCT SPECIFICATIONS
Construction Extruded aluminum with thermoplastic insulator • Injection
molded polycarbonate dead-end with set screw • Standard lengths may be
cut-to-length by installer.
Electrical Two 12 gauge solid copper conductors • Rated 20 amps
at 120 volts • Aluminum channel used as system ground • One-piece
insulator insures consistent conductor spacing for reliable electrical contact
• Insulating bushings supplied at mounting hole locations to prevent shorts
to ground.
Labels UL/CUL listed.
PRODUCT INSTALLATION
Debossed polarity line provides visual cue to proper trac, trac connector
and fixture alignment • Supplied with toggle bolts for surface mounting
• Insulator stays same length as extrusion to simplify field-cutting of trac
• Connectors and feeds simply push into trac sections.
Specifications subject to change without notice.
D2.1.0
TRAC-LITES
One Circuit Trac System
TRAC SECTIONS & SYSTEM COMPONENTS
R Series
ORDERING INFORMATION Example: R 8FT WH
Series Length Finish
R
Trac-Lites 1-Circuit Track Sections
2FT
2-foot track section; actual length 19-7/8”
4FT
4-foot track section; actual length 43-7/8”
6FT
6-foot track section; actual length 67-7/8”
8FT
8-foot track section; actual length 91-7/8”
BL
Black
BZ
Bronze
NAT
Natural
SL
Silver
WH
White