Operating Guide

REV-7/14
DIMENSIONS
4” MINIATURE UNIVERSAL
TC REMODEL HOUSING
INCANDESCENT LAMPS
TC1R
G3.1.2
Project:
Fixture Type:
Location:
Contact/Phone:
11 1/2"
5 1/4"
4 3/4"
PRODUCT CODES
Catalog Number Input Voltage Lamp Rating (max.)
TC1R 120V R14/R16/R20/PAR16/PAR20 (See reverse for max. trim rating)
PRODUCT DESCRIPTION
TC Housing for remodel application where back side of ceiling
is not accessible • Installs through an opening in the ceiling from
below • Secured in place by factory installed remodel springs
• Design for use in non-insulated areas • If installed where
insulation is present, the insulation must be pulled back 3” from all
sides of the TC housing.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected – see reverse.
Socket Detachable medium base porcelain with nickel-plated
copper screw shell.
Trims Trim selection shown on reverse.
Labels U.L. listed for through-branch wiring, damp locations and
IP • Product thermally protected against improper use of lamps
or insulation • Union made • UL Listed/CSA certified • Trim No.
11, 12, 4101, 4102 and 4181 are wet location approved for
covered ceiling applications • Trims 14, 17 are wet location
approved for covered ceiling applications, when used with
outdoor rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Junction Box Pre-wired junction box, UL listed/CSA certified for
through-branch wiring maximum 4 No. 12 AWG 90˚ C branch
circuit conductors (2 in, 2 out) • Junction box provided with
removable access plate, (5)
1
⁄2” knockouts, (4) Non-metallic
sheathed cable connectors and ground wire • Knockouts
equipped with pryout slots.
Housing TC housing, 22-gauge galvanized steel • Remodel
springs accommodate up to a 1
1
/
8
” ceiling thickness.
4 3/8” CEILING CUTOUT
ACCESSORIES
Catalog No. Description
GU10-WHIP GU10 Socket Whip
SMPLT-4 4” Housing Locator
To order, specify catalog number.