User's Manual

ED:01
※ Remark (OK : ○, NG : X, No Relation : - )
Lot No Model Buyer
Decision
1○
3○
4○
5○
6○
7○
8○
1○
2○
3○
4○
5○
6○
1○
○
○
4○
5○
6○
1○
2○
3○
4○
1○
2○
1○
2○
10 Nf : by push-pull gauge (MI)
Headset Separation Force 8 Nf : by push-pull gauge (MI)
1.8~3.5 Nf : by push-pull gauge (MA)Key Stroke
Rubber Endurance
Board Assembling
Remark
Refer to Outgoing Inspection Standard
Refer to Outgoing Inspection Standard
Omitted or missed silk printing (MA)
Labeling
Refer to Outgoing Inspection Standard
RF
Test
PBA
Condition
Packing
Sprious Emission
Labeling
Contents
Refer to Outgoing Inspection StandardSoldering
Refer to Outgoing Inspection Standard
Refer to Outgoing Inspection Standard
2.411880~2.412120 GHz(MA)Frequency Error
For 1 hour, must not broken (MI)Long Duration Call
Occupied Bandwidth
Channel Power
Display phone No, signal strength, battery indi.(MA)
Call Display Display incomming call No., answer call (MA)
Criteria
Key Stick
Charger Locking
Spray Be compared with limit samples (MA)
Silk Screen Printing
1.6 Nf : by push-pull gauge (MA)
90 degree (MI), 45 degree (MA)
16 Nf : by push-pull gauge (MI)
0312SG-001
Inspection Point
Information Display
Appearance
Car Kit Separation Force
Visual Area of Molding Parts Be compared with limit samples (MA)
Gaps
Mechanicals
After power On/Off, hold configuration Data (MA)
Uneven edge fitting Refer to Outgoing Inspection Standard
Black Spot/Line, White Spots, Scratch,
Dust
Refer to Outgoing Inspection Standard
Receiver & Mic Without noise, can hear callee's voice (MA)
Basic
Function
Pass (MI)
4~7 dBm (MA)
0~26 MHz (MI)
Be compared with product specifiaction (MA)
JUNSUNGTECH Co., Ltd.
JSWAM83
JSWAM83 Inspection List
2
3
4
Cofiguration
Connection